EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Near-threshold fatigue crack growth and fatigue strength of ER70S-6 steel processed by wire arc additive manufacturing

Zhan Wen Chen, Yuanming Wang, Karl Peter Davidson, Benjamin Jackson

Progress in Additive Manufacturing · 2026-10 · 11 (10) · 10465-10481

DOI: 10.1007/s40964-026-01908-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 29.08.2026. Verfasst von Zhan Wen Chen und 3 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Auckland University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, fatigue crack growth (FCG) tests were conducted to determine the threshold stress intensity factor ( ΔK th ) of ER70S-6 steel processed by wire arc additive manufacturing (WAAM). Samples were orientated with the crack direction (CD) both parallel (//) and normal (⊥) to build direction (BD). In addition, tests were conducted to obtain data of S–N fatigue strength and cycles to failure ( N f ). Following S–N testing, the sizes of defects were determined. The resulting S–N data, together with the measured defect sizes and ΔK th values, were subsequently analysed using the Kitagawa–Takahashi (K–T) diagram approach. Applying R = 0.1, the ΔK th value for CD//BD samples at ~ 4.5 MPa $$\sqrt {\text{m}}$$ has been found to be slightly lower than the ΔK th value for CD⊥BD samples at ~ 5.0 MPa $$\sqrt {\text{m}}$$ . Some elongated α-ferrite grains orientated close to BD have been identified, suggesting that the cementite containing pearlite colonies may be locally aligned with the BD, reducing fatigue crack resistance along BD and thereby lowering ΔK th . For both CD//BD and CD⊥BD samples, the effect of the defect size up to 520 μm affecting N f can be explained using the K–T diagram approach. It is also shown that, when the effect of defects is excluded, the endurance limit of CD⊥BD samples is slightly higher than that of CD//BD samples, consistent with ΔK th (CD⊥BD samples) > ΔK th (CD//BD samples).

Förderung

  • Auckland University of Technology

Zitieren

APA

Chen, Z. W., Wang, Y., Davidson, K. P., & Jackson, B. (2026). Near-threshold fatigue crack growth and fatigue strength of ER70S-6 steel processed by wire arc additive manufacturing. Progress in Additive Manufacturing, 11(10), 10465-10481. https://doi.org/10.1007/s40964-026-01908-0

Vancouver

Chen ZW, Wang Y, Davidson KP, Jackson B. Near-threshold fatigue crack growth and fatigue strength of ER70S-6 steel processed by wire arc additive manufacturing. Progress in Additive Manufacturing. 2026;11(10):10465-10481. doi:10.1007/s40964-026-01908-0

BibTeX
@article{Chen2026,
  author = {Chen, Zhan Wen and Wang, Yuanming and Davidson, Karl Peter and Jackson, Benjamin},
  title = {Near-threshold fatigue crack growth and fatigue strength of ER70S-6 steel processed by wire arc additive manufacturing},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {10},
  pages = {10465--10481},
  doi = {10.1007/s40964-026-01908-0}
}
Kostenlos starten →