Sample Partitioning for Uncertainty Reduction in FEA-Based Milling Stability Prediction
Journal of Manufacturing and Materials Processing · 23.06.2026 · 10 (7) · 215
DOI: 10.3390/jmmp10070215 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 23.06.2026. Verfasst von Junbeom Son und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Office of Local Defense Community Cooperation, Department of War.
Abstract (Originalsprache)
Milling stability prediction requires tool and workpiece dynamics and cutting force coefficients, and uncertainty in these inputs propagates to the predicted stability maps. This study experimentally evaluates sample partitioning for uncertainty reduction in milling stability when the workpiece dynamics are predicted using finite element analysis (FEA). The FEA-predicted workpiece natural frequency and modal stiffness differed from the tap-tested reference values by 4.9% and 14.3%, respectively, leading to different predicted stability maps. Initial candidate stability maps were generated by Monte Carlo simulation using the uncertain FEA-predicted workpiece modal parameters. The experimentally identified cutting force coefficients were also treated as uncertain inputs. Physical cutting tests on a constrained motion dynamometer system were then used to retain or reject candidate maps based on the observed stable/unstable outcomes. The candidate maps were reduced from 10,000 to 6 after five partitioning steps, and the retained maps moved toward the tap-tested reference stability map. These results demonstrate that sample partitioning can reduce uncertainty in FEA-based stability maps using a limited number of cutting tests.
Förderung
- National Science Foundation
- Office of Local Defense Community Cooperation, Department of War
Zitieren
APA
Son, J., Vaidya, U., & Schmitz, T. (2026). Sample Partitioning for Uncertainty Reduction in FEA-Based Milling Stability Prediction. Journal of Manufacturing and Materials Processing, 10(7), 215. https://doi.org/10.3390/jmmp10070215
Vancouver
Son J, Vaidya U, Schmitz T. Sample Partitioning for Uncertainty Reduction in FEA-Based Milling Stability Prediction. Journal of Manufacturing and Materials Processing. 2026;10(7):215. doi:10.3390/jmmp10070215
BibTeX
@article{Son2026,
author = {Son, Junbeom and Vaidya, Uday and Schmitz, Tony},
title = {Sample Partitioning for Uncertainty Reduction in FEA-Based Milling Stability Prediction},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {7},
pages = {215},
doi = {10.3390/jmmp10070215}
}
EUVIMED