EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Milling Stability Modeling by Sample Partitioning with Chatter Frequency-Based Test Point Selection

Tony Schmitz

Journal of Manufacturing and Materials Processing · 24.05.2024 · 8 (3) · 109

DOI: 10.3390/jmmp8030109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 24.05.2024. Verfasst von Tony Schmitz. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MxD (Manufacturing x Digital) and the NSF Engineering Research Center for Hybrid Autonomous Manufacturing Moving from Evolution to Revolution (ERC-HAMMER).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes a sample partitioning approach to retain or reject samples from an initial distribution of stability maps using milling test results. The stability maps are calculated using distributions of uncertain modal parameters that represent the tool tip frequency response functions and cutting force model coefficients. Test points for sample partitioning are selected using either (1) the combination of spindle speed and mean axial depth from the available samples that provides the high material removal rate, or (2) a spindle speed based on the chatter frequency and mean axial depth at that spindle speed. The latter is selected when an unstable (chatter) result is obtained from a test. Because the stability model input parameters are also partitioned using the test results, their uncertainty is reduced using a limited number of tests and the milling stability model accuracy is increased. A case study is provided to evaluate the algorithm.

Förderung

  • MxD (Manufacturing x Digital) and the NSF Engineering Research Center for Hybrid Autonomous Manufacturing Moving from Evolution to Revolution (ERC-HAMMER)

Zitieren

APA

Schmitz, T. (2024). Milling Stability Modeling by Sample Partitioning with Chatter Frequency-Based Test Point Selection. Journal of Manufacturing and Materials Processing, 8(3), 109. https://doi.org/10.3390/jmmp8030109

Vancouver

Schmitz T. Milling Stability Modeling by Sample Partitioning with Chatter Frequency-Based Test Point Selection. Journal of Manufacturing and Materials Processing. 2024;8(3):109. doi:10.3390/jmmp8030109

BibTeX
@article{Schmitz2024,
  author = {Schmitz, Tony},
  title = {Milling Stability Modeling by Sample Partitioning with Chatter Frequency-Based Test Point Selection},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2024},
  volume = {8},
  number = {3},
  pages = {109},
  doi = {10.3390/jmmp8030109}
}
Kostenlos starten →