EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing of 3D Auxetic Structures Through Perforations of Corrugated Systems

Libera Vitiello, Gianluca Cicala, Giovanni Filippone, Pietro Russo, Ruben Gatt, Joseph N. Grima, Pierre-Sandre Farrugia

Journal of Manufacturing and Materials Processing · 04.06.2026 · 10 (6) · 198

DOI: 10.3390/jmmp10060198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 04.06.2026. Verfasst von Libera Vitiello und 6 weiteren Autor:innen. Die Arbeit nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xjenza Malta through the FUSION: R&I Research Excellence Programme, University of Malta.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabrication of auxetic structures has always been a limiting factor in their availability. Their complex shape, a requirement originating from the deformation mechanism that leads to a negative Poisson’s ratio, has also limited their manufacturability. In the case of auxetic systems that deform through the rotating semi-rigid mechanism—which allows for the concurrent deformation and rotation of their constituent element—the situation is even more complicated. Relatively few examples of these types of structures are known, with most work on them being largely theoretical. This includes their use in explaining the auxetic mechanism in certain molecules. Nevertheless, these systems can, in principle, offer added functionalities, as they undergo a shape change while still exhibiting a negative Poisson’s ratio. To this end, this work presents a practical scheme for the manufacturing of 3D rotating semi-rigid units, whereby these are produced through perforations of corrugated sheets. For the purpose of this investigation, diamond-shaped perforations were chosen, and the side profile of the corrugated sheet consisted of successive semicircles that alternate in orientation. Analysis of the system indicated that a 3D negative Poisson’s ratio can be obtained while allowing the distance between the hinges to change during deformation.

Förderung

  • Xjenza Malta through the FUSION: R&I Research Excellence Programme
  • University of Malta

Zitieren

APA

Vitiello, L., Cicala, G., Filippone, G., Russo, P., Gatt, R., Grima, J. N., & Farrugia, P. (2026). Manufacturing of 3D Auxetic Structures Through Perforations of Corrugated Systems. Journal of Manufacturing and Materials Processing, 10(6), 198. https://doi.org/10.3390/jmmp10060198

Vancouver

Vitiello L, Cicala G, Filippone G, Russo P, Gatt R, Grima JN, et al. Manufacturing of 3D Auxetic Structures Through Perforations of Corrugated Systems. Journal of Manufacturing and Materials Processing. 2026;10(6):198. doi:10.3390/jmmp10060198

BibTeX
@article{Vitiello2026,
  author = {Vitiello, Libera and Cicala, Gianluca and Filippone, Giovanni and Russo, Pietro and Gatt, Ruben and Grima, Joseph N. and Farrugia, Pierre-Sandre},
  title = {Manufacturing of 3D Auxetic Structures Through Perforations of Corrugated Systems},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {198},
  doi = {10.3390/jmmp10060198}
}
Kostenlos starten →