EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A Review of 3D-Printed Auxetic Honeycomb Structures

Dongxia Wang, Jiahe Hu, Jinglong Zhang

Academic Journal of Applied Sciences · 18.03.2026 · 1 (1) · 4-12

DOI: 10.54097/eyg04704 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Academic Journal of Applied Sciences, online erschienen am 18.03.2026. Verfasst von Dongxia Wang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Auxetic honeycomb structures, characterized by their unique lateral expansion behavior, have shown great potential in energy absorption and structural protection applications. With the rapid development of additive manufacturing technologies, the high-precision fabrication of complex honeycomb structures has become feasible, significantly promoting research in this field. This paper presents a comprehensive review of recent advances in 3D-printed auxetic honeycomb structures. First, the fundamental principles of additive manufacturing and its advantages in fabricating complex honeycomb geometries are introduced. Subsequently, the geometric configurations and deformation mechanisms of typical auxetic honeycomb structures are systematically summarized, with emphasis on dominant mechanisms such as cell rotation, bending, and hinging. On this basis, recent progress in structural design optimization, mechanical performance regulation, and engineering applications is reviewed. Finally, the existing challenges, including the lack of systematic design methodologies, unclear process–structure–property relationships, and insufficient understanding of in-service performance, are discussed, and future research directions are outlined. This review aims to provide a comprehensive reference for the design and application of 3D-printed auxetic honeycomb structures.

Zitieren

APA

Wang, D., Hu, J., & Zhang, J. (2026). A Review of 3D-Printed Auxetic Honeycomb Structures. Academic Journal of Applied Sciences, 1(1), 4-12. https://doi.org/10.54097/eyg04704

Vancouver

Wang D, Hu J, Zhang J. A Review of 3D-Printed Auxetic Honeycomb Structures. Academic Journal of Applied Sciences. 2026;1(1):4-12. doi:10.54097/eyg04704

BibTeX
@article{Wang2026,
  author = {Wang, Dongxia and Hu, Jiahe and Zhang, Jinglong},
  title = {A Review of 3D-Printed Auxetic Honeycomb Structures},
  journal = {Academic Journal of Applied Sciences},
  year = {2026},
  volume = {1},
  number = {1},
  pages = {4--12},
  doi = {10.54097/eyg04704}
}
Kostenlos starten →