DSC and TEM Investigation of Precipitation Behavior in a Cold-Rolled Pre-Aged Al-Mg-Si-Cu Alloy
Journal of Manufacturing and Materials Processing · 08.05.2026 · 10 (5) · 167
DOI: 10.3390/jmmp10050167 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 08.05.2026. Verfasst von Vu Ngoc Hai und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the effect of cold rolling on precipitation behavior and mechanical properties in a pre-aged Al–Mg–Si–Cu alloy. Following pre-aging at 35 °C, samples were subjected to various cold-rolling reductions (0–80%) and subsequently aged at 160 °C. Hardness measurements reveal that increasing deformation significantly enhances peak hardness and accelerates aging kinetics, with the 80% cold-rolled sample reaching peak hardness within 6 h compared to 1 week for the undeformed condition. Differential scanning calorimetry (DSC) analysis shows that all precipitation peaks shift to lower temperatures with increasing level of deformation, accompanied by a reduction in activation energy and narrowing of the full width at half-maximum, indicating accelerated precipitation reactions. Transmission electron microscopy (TEM) observations demonstrate that cold rolling introduces a high density of dislocations, which act as preferential nucleation sites for precipitates. As a result, a refined and more uniform distribution of nanoscale precipitates is obtained, with increasing number density and decreasing size at higher deformation levels. The combined results indicate that deformation-induced dislocations play a critical role in modifying precipitation pathways, promoting rapid formation of metastable phases, and enhancing the overall strengthening response of the alloy.
Zitieren
APA
Hai, V. N., Lee, S., Tsuchiya, T., Katsumi, T., Kita, K., & Matsuda, K. (2026). DSC and TEM Investigation of Precipitation Behavior in a Cold-Rolled Pre-Aged Al-Mg-Si-Cu Alloy. Journal of Manufacturing and Materials Processing, 10(5), 167. https://doi.org/10.3390/jmmp10050167
Vancouver
Hai VN, Lee S, Tsuchiya T, Katsumi T, Kita K, Matsuda K. DSC and TEM Investigation of Precipitation Behavior in a Cold-Rolled Pre-Aged Al-Mg-Si-Cu Alloy. Journal of Manufacturing and Materials Processing. 2026;10(5):167. doi:10.3390/jmmp10050167
BibTeX
@article{Hai2026,
author = {Hai, Vu Ngoc and Lee, Seungwon and Tsuchiya, Taiki and Katsumi, Tetsuya and Kita, Kazuhiko and Matsuda, Kenji},
title = {DSC and TEM Investigation of Precipitation Behavior in a Cold-Rolled Pre-Aged Al-Mg-Si-Cu Alloy},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {5},
pages = {167},
doi = {10.3390/jmmp10050167}
}
EUVIMED