Effect of Pre-Deformation on Precipitation in Al–Zn–Mg–Cu Alloy
Metals and Materials International · 2024-12 · 30 (12) · 3294-3310
DOI: 10.1007/s12540-024-01718-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals and Materials International, online erschienen am 29.06.2024. Verfasst von Yujin Rhee und 5 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this work, strengthening effects and evolution of precipitates in a pre-deformed Al–Zn–Mg–Cu alloy during ageing were investigated using Vickers hardness measurements, tensile tests, and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). It was found that all cold rolled conditions had higher mechanical strength than the non-deformed condition for all ageing times and that this effect increases at higher deformation ratios. It was also found that the non-deformed condition has a higher age hardening response than that of the cold rolled conditions. A homogeneous precipitate distribution was observed in the non-deformed condition, while the cold rolled conditions contained non-uniformly distributed precipitates due to the introduced dislocations. This led to larger precipitate sizes and a reduction in the precipitate number densities in the pre-deformed conditions. HAADF-STEM analysis revealed differences in the fraction of different precipitate types between the non-deformed and the cold rolled conditions. η', η 2, and disordered η phase were observed in the non-deformed condition, while η', η 2 and the newly identified Y phase were observed in the cold rolled conditions. The disordered η phase contained structural units of the η 1 phase and was associated with reducing the lattice misfit between this phase and the Al matrix. Formation of the Y phase was related to an accelerated nucleation rate in the regions of high dislocation density. Graphical abstract
Zitieren
APA
Rhee, Y., Thronsen, E., Ryggetangen, O., Marioara, C. D., Holmestad, R., & Kobayashi, E. (2024). Effect of Pre-Deformation on Precipitation in Al–Zn–Mg–Cu Alloy. Metals and Materials International, 30(12), 3294-3310. https://doi.org/10.1007/s12540-024-01718-5
Vancouver
Rhee Y, Thronsen E, Ryggetangen O, Marioara CD, Holmestad R, Kobayashi E. Effect of Pre-Deformation on Precipitation in Al–Zn–Mg–Cu Alloy. Metals and Materials International. 2024;30(12):3294-3310. doi:10.1007/s12540-024-01718-5
BibTeX
@article{Rhee2024,
author = {Rhee, Yujin and Thronsen, Elisabeth and Ryggetangen, Oskar and Marioara, Calin D. and Holmestad, Randi and Kobayashi, Equo},
title = {Effect of Pre-Deformation on Precipitation in Al–Zn–Mg–Cu Alloy},
journal = {Metals and Materials International},
year = {2024},
volume = {30},
number = {12},
pages = {3294--3310},
doi = {10.1007/s12540-024-01718-5}
}
EUVIMED