Process–Design Co-Optimisation of Laser Powder Bed Fusion Titanium Gyroid Lattices via Deep Learning
Journal of Manufacturing and Materials Processing · 09.03.2026 · 10 (3) · 92
DOI: 10.3390/jmmp10030092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 09.03.2026. Verfasst von Alexander Dawes und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society.
Abstract (Originalsprache)
Laser powder bed fusion (LPBF) enables controlled gyroid lattices, but mapping both process and design to performance remains challenging when datasets are small and interactions are non-linear. In this study, data-driven models that link energy density and lattice geometry to Young’s modulus and yield strength were established for sheet and network gyroid architectures. To stabilise small-data learning, stacked-autoencoder pre-training was benchmarked against greedy layer-wise pre-training. Compression characterisation data at under-represented energy-density conditions were added to fill data gaps and validate predictions. The models support property-driven design in which given modulus and yield strength targets inform a method that returns feasible combinations of laser powder bed fusion settings and gyroid density and size. Pre-trained models reduced error and captured the relationship between stiffness and density and between strength and density, with yield strength prediction errors of 3.51% for sheet architectures and 8.76% for network architectures. Young’s modulus showed a higher variability that is consistent with sensitivities in LPBF such as surface roughness and thin walls. This work contributes an artificial intelligence method for manufacturing datasets using stacked autoencoder pre-training with fine-tuning, and an inverse-design workflow that maps energy density and gyroid geometry to Young’s modulus and yield strength in titanium lattices.
Förderung
- Royal Society
Zitieren
APA
Dawes, A., Hassan, A. A., Hassanin, H., & Essa, K. (2026). Process–Design Co-Optimisation of Laser Powder Bed Fusion Titanium Gyroid Lattices via Deep Learning. Journal of Manufacturing and Materials Processing, 10(3), 92. https://doi.org/10.3390/jmmp10030092
Vancouver
Dawes A, Hassan AA, Hassanin H, Essa K. Process–Design Co-Optimisation of Laser Powder Bed Fusion Titanium Gyroid Lattices via Deep Learning. Journal of Manufacturing and Materials Processing. 2026;10(3):92. doi:10.3390/jmmp10030092
BibTeX
@article{Dawes2026,
author = {Dawes, Alexander and Hassan, Ali Abdelhafeez and Hassanin, Hany and Essa, Khamis},
title = {Process–Design Co-Optimisation of Laser Powder Bed Fusion Titanium Gyroid Lattices via Deep Learning},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {3},
pages = {92},
doi = {10.3390/jmmp10030092}
}
EUVIMED