EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion

Hany Hassanin iD, Mahmoud Ahmed El-Sayed iD, Mahmoud Ahmadein iD, Naser A Alsaleh iD, Sabbah Ataya iD, Mohamed M Z Ahmed iD, Khamis Essa iD

Micromachines · 20.08.2023 · 14 (8) · 1642

DOI: 10.3390/mi14081642 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.08.2023. Verfasst von Hany Hassanin und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Technology, and Design, Canterbury Christ Church University, Canterbury CT1 1QU, UK. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The authors extend their appreciation to the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) for funding and supporting th…, Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University, (IMSIU).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Ti6Al4V alloy has many advantages, such as being lightweight, formal, and resistant to corrosion. This makes it highly desirable for various applications, especially in the aerospace industry. Laser Powder Bed Fusion (LPBF) is a technique that allows for the production of detailed and unique parts with great flexibility in design. However, there are challenges when it comes to achieving high-quality surfaces and porosity formation in the material, which limits the wider use of LPBF. To tackle these challenges, this study uses statistical techniques called Design of Experiments (DoE) and Analysis of Variance (ANOVA) to investigate and optimise the process parameters of LPBF for making Ti6Al4V components with improved density and surface finish. The parameters examined in this study are laser power, laser scan speed, and hatch space. The optimisation study results show that using specific laser settings, like a laser power of 175 W, a laser scan speed of 1914 mm/s, and a hatch space of 53 µm, produces Ti6Al4V parts with a high relative density of 99.54% and low top and side surface roughness of 2.6 µm and 4.3 µm, respectively. This promising outcome demonstrates the practicality of optimising Ti6Al4V and other metal materials for a wide range of applications, thereby overcoming existing limitations and further expanding the potential of LPBF while minimising inherent process issues.

Schlagwörter

Stichwörter der Autor:innen

ANOVATi6Al4Vdesign of experimentslaser powder bed fusionprocess parameters

Autor:innen und Institutionen

  • School of Engineering, Technology, and Design, Canterbury Christ Church University, Canterbury CT1 1QU, UK.
  • Department of Industrial and Management Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria 21599, Egypt.
  • Department of Production Engineering and Mechanical Design, Tanta University, Tanta 31512, Egypt.
  • Department of Mechanical Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia.
  • Mechanical Engineering Department, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj 16273, Saudi Arabia.
  • School of Engineering, University of Birmingham, Birmingham B15 2TT, UK.

ORCID-Profile: Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed M Z Ahmed, Khamis Essa

Förderung

  • The authors extend their appreciation to the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) for funding and supporting th…
  • Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University, (IMSIU)

Zitieren

APA

Hassanin, H., El-Sayed, M. A., Ahmadein, M., Alsaleh, N. A., Ataya, S., Ahmed, M. M. Z., & Essa, K. (2023). Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion. Micromachines, 14(8), 1642. https://doi.org/10.3390/mi14081642

Vancouver

Hassanin H, El-Sayed MA, Ahmadein M, Alsaleh NA, Ataya S, Ahmed MMZ, et al. Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion. Micromachines. 2023;14(8):1642. doi:10.3390/mi14081642

BibTeX
@article{Hassanin2023,
  author = {Hassanin, Hany and El-Sayed, Mahmoud Ahmed and Ahmadein, Mahmoud and Alsaleh, Naser A and Ataya, Sabbah and Ahmed, Mohamed M Z and Essa, Khamis},
  title = {Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {8},
  pages = {1642},
  doi = {10.3390/mi14081642}
}
Kostenlos starten →