EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advances in Texturing of Polycrystalline Diamond Tools in Cutting Hard-to-Cut Materials

Sergey N. Grigoriev, Anna A. Okunkova, Marina A. Volosova, Khaled Hamdy, Alexander S. Metel

Journal of Manufacturing and Materials Processing · 09.01.2026 · 10 (1) · 27

DOI: 10.3390/jmmp10010027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 09.01.2026. Verfasst von Sergey N. Grigoriev und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The operational ability of a unit or mechanism depends mainly on the quality of the mechanically produced working surfaces. Many materials can be assigned to a group of hard-to-cut materials that includes titanium- and aluminum-based alloys, a new class of heat-resistant alloys, SiCp/Al composites, hard alloys, and other alloys. The difficulties in their machining are related not only to the high temperatures achieved on the contact pads under mechanical load and the extreme cutting conditions but also to the properties of those materials, which affect the adhesion of the chip to the tool faces, hindering chip flow. One of the possible solutions to reduce those effects and improve the operational life of the tool, and as a consequence, the final quality of the working surface of the unit, is texturing the rake face of the tool with microgrooves or nanogrooves, microholes or nanoholes (pits, dimples), micronodes, cross-chevron textures, and other microtextures, the depth of which is in the range of 3.0–200.0 µm. This review is addressed at systematizing the data obtained on micro- and nanotexturing of PCD tools for cutting hard-to-cut materials by different techniques (fiber laser graving, femto- and nanosecond laser, electrical discharge machining, fused ion beam), additionally subjected to fluorination and dip- and drop-based coatings, and the effect created by the use of the textured PCD tool on the machined surface.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Grigoriev, S. N., Okunkova, A. A., Volosova, M. A., Hamdy, K., & Metel, A. S. (2026). Advances in Texturing of Polycrystalline Diamond Tools in Cutting Hard-to-Cut Materials. Journal of Manufacturing and Materials Processing, 10(1), 27. https://doi.org/10.3390/jmmp10010027

Vancouver

Grigoriev SN, Okunkova AA, Volosova MA, Hamdy K, Metel AS. Advances in Texturing of Polycrystalline Diamond Tools in Cutting Hard-to-Cut Materials. Journal of Manufacturing and Materials Processing. 2026;10(1):27. doi:10.3390/jmmp10010027

BibTeX
@article{Grigoriev2026,
  author = {Grigoriev, Sergey N. and Okunkova, Anna A. and Volosova, Marina A. and Hamdy, Khaled and Metel, Alexander S.},
  title = {Advances in Texturing of Polycrystalline Diamond Tools in Cutting Hard-to-Cut Materials},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {1},
  pages = {27},
  doi = {10.3390/jmmp10010027}
}
Kostenlos starten →