EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Surface Texturing of Cutting Tools for Improving the Machining of Ti6Al4V: A Review

Javier Garcia-Fernandez, Jorge Salguero, Moises Batista, Juan Manuel Vazquez-Martinez, Irene Del Sol

Metals · 12.12.2024 · 14 (12) · 1422

DOI: 10.3390/met14121422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 12.12.2024. Verfasst von Javier Garcia-Fernandez und 4 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MCIN/AEI/10.13039/501100011033 and ERDF/EU, University of Cadiz.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The machining of titanium alloys, particularly Ti6Al4V, presents a significant challenge in manufacturing engineering. Its high strength, low thermal conductivity and high chemical reactivity make Ti6Al4V a hard-to-machine material. However, the machining process is critical for aerospace and biomedical industries. The rapid wear and short lifetime of cutting tools are the main limitations in Ti6Al4V machining, leading to a large increase in manufacturing costs and compromising the surface quality of machined components. Faced with this problem, the texturing of cutting tools, especially through laser-based techniques, has gained considerable attention in the last decade due to improvement of the tribological properties of textured surfaces. Laser Surface Texturing (LST) has emerged as a promising technique to improve the tribological performance of cutting tools by enabling the creation of precise surface structures. Building on prior research, this review provides a comprehensive overview of the most recent research on this topic, summarizing key findings and outcomes from various investigations.

Förderung

  • MCIN/AEI/10.13039/501100011033 and ERDF/EU
  • University of Cadiz

Zitieren

APA

Garcia-Fernandez, J., Salguero, J., Batista, M., Vazquez-Martinez, J. M., & Sol, I. D. (2024). Laser Surface Texturing of Cutting Tools for Improving the Machining of Ti6Al4V: A Review. Metals, 14(12), 1422. https://doi.org/10.3390/met14121422

Vancouver

Garcia-Fernandez J, Salguero J, Batista M, Vazquez-Martinez JM, Sol ID. Laser Surface Texturing of Cutting Tools for Improving the Machining of Ti6Al4V: A Review. Metals. 2024;14(12):1422. doi:10.3390/met14121422

BibTeX
@article{GarciaFernandez2024,
  author = {Garcia-Fernandez, Javier and Salguero, Jorge and Batista, Moises and Vazquez-Martinez, Juan Manuel and Sol, Irene Del},
  title = {Laser Surface Texturing of Cutting Tools for Improving the Machining of Ti6Al4V: A Review},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1422},
  doi = {10.3390/met14121422}
}
Kostenlos starten →