Mechanical and Micromorphological Characterization of Graphene-Reinforced PMMA Bonding to Enamel and Dentin After Surface Conditioning
Journal of Functional Biomaterials · 19.11.2026 · 17 (11) · 589
DOI: 10.3390/jfb17110589 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.11.2026. Verfasst von Antonio J. Ortiz-Ruiz und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Graphene-reinforced polymethyl methacrylate (G-PMMA) requires effective adhesion protocols for dental restorations. This study evaluated the effects of Al2O3 airborne-particles abrasion and an experimental primer on G-PMMA bonding to bovine enamel and dentin. Two hundred seventy-six bovine incisors were randomly allocated to 12 groups (n = 23) according to substrate (enamel/dentin), abrasion (none, 50 µm or 1B10 µm particles), and primer application (with/without). Shear bond strength (SBS), elastic modulus, maximum deformation and failure modes were evaluated. Interfacial morphology was examined using field-emission scanning electron microscopy (FESEM) and fluorescence microscopy. Mechanical outcomes were analyzed using a two-way analysis of variance (ANOVA). In enamel, abrasion and primer application significantly increased SBS (p < 0.001), with the highest values following 110 µm abrasion. In dentin, only primer application significantly increased SBS (p = 0.002). Significant interactions were observed between abrasion and primer, affected elastic modulus and maximum deformation in enamel, and elastic modulus in dentin. Surface treatments shifted failure patterns toward the interface between the luting material and the dental substrate. Microscopic analysis revealed micromechanical interlocking and the localization of the primer. Surface conditioning improved G-PMMA adhesion in a substrate-dependent manner. Abrasion was particularly effective in enamel, whereas primer application had a greater influence on dentin.
Zitieren
APA
Ortiz-Ruiz, A. J., Jin-Wang, Z., Martínez-González, A., Puig-Praena, A., Martínez-Cánovas, A., & Belmonte, I. S. (2026). Mechanical and Micromorphological Characterization of Graphene-Reinforced PMMA Bonding to Enamel and Dentin After Surface Conditioning. Journal of Functional Biomaterials, 17(11), 589. https://doi.org/10.3390/jfb17110589
Vancouver
Ortiz-Ruiz AJ, Jin-Wang Z, Martínez-González A, Puig-Praena A, Martínez-Cánovas A, Belmonte IS. Mechanical and Micromorphological Characterization of Graphene-Reinforced PMMA Bonding to Enamel and Dentin After Surface Conditioning. Journal of Functional Biomaterials. 2026;17(11):589. doi:10.3390/jfb17110589
BibTeX
@article{OrtizRuiz2026,
author = {Ortiz-Ruiz, Antonio J. and Jin-Wang, Zhibo and Martínez-González, Ana and Puig-Praena, Alba and Martínez-Cánovas, Ascensión and Belmonte, Ildefonso Serrano},
title = {Mechanical and Micromorphological Characterization of Graphene-Reinforced PMMA Bonding to Enamel and Dentin After Surface Conditioning},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {11},
pages = {589},
doi = {10.3390/jfb17110589}
}
EUVIMED