EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Mastication on Orthodontic Wire Sliding in Nickel–Titanium Brackets with Superelastic Wings

Jasmin Wichelhaus iD, Uwe Baumert iD, Corinna Seidel, Hisham Sabbagh iD

Journal of Functional Biomaterials · 15.08.2026 · 17 (8) · 406

DOI: 10.3390/jfb17080406 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 15.08.2026. Verfasst von Jasmin Wichelhaus und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics and Dentofacial Orthopedics, University Hospital, LMU Munich, Goethestrasse 70, 80336 Munich, Germany. Die Arbeit nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

Orthodontic tooth movement (OTM) during sliding mechanics is influenced by a multitude of interactions. Studies suggest that vibration induced by mastication or usage of electric tooth brushes might impact resistance to sliding (RS) in conventional brackets. In superelastic brackets, archwire sliding might also be altered due to deformation of the bracket wings during mastication. Therefore, the aim of this study was to investigate how the superelastic properties of Nickel–Titanium (NiTi) brackets affect archwire sliding during mastication. (2)

Methods

Orthodontic superelastic NiTi archwires with diameters of 0.014” and 0.016” were ligated into four superelastic NiTi brackets. One bracket was positioned with a vertical offset of 1 mm to simulate clinical vertical leveling. A weight force was applied to axially preload the archwire. The occlusal and axial forces affecting the movement of the archwires through the bracket were measured. (3)

Results

Low chewing forces caused a measurable axial movement of the 0.014” wire. Increased chewing forces resulted in higher axial movements. The archwire diameter had an impact: 0.014” NiTi required lower masticatory forces to initiate wire motion as compared to the 0.016” NiTi. (4)

Conclusions

The superelastic NiTi brackets examined showed that under simulated continuous dynamic masticatory loading, obstacles such as friction or binding could be overcome.

Schlagwörter

Stichwörter der Autor:innen

bindingfrictionmasticationorthodonticssliding mechanicssuperelastic bracket

Autor:innen und Institutionen

  • Department of Orthodontics and Dentofacial Orthopedics, University Hospital, LMU Munich, Goethestrasse 70, 80336 Munich, Germany.

ORCID-Profile: Jasmin Wichelhaus, Uwe Baumert, Hisham Sabbagh

Zitieren

APA

Wichelhaus, J., Baumert, U., Seidel, C., & Sabbagh, H. (2026). Influence of Mastication on Orthodontic Wire Sliding in Nickel–Titanium Brackets with Superelastic Wings. Journal of Functional Biomaterials, 17(8), 406. https://doi.org/10.3390/jfb17080406

Vancouver

Wichelhaus J, Baumert U, Seidel C, Sabbagh H. Influence of Mastication on Orthodontic Wire Sliding in Nickel–Titanium Brackets with Superelastic Wings. Journal of Functional Biomaterials. 2026;17(8):406. doi:10.3390/jfb17080406

BibTeX
@article{Wichelhaus2026,
  author = {Wichelhaus, Jasmin and Baumert, Uwe and Seidel, Corinna and Sabbagh, Hisham},
  title = {Influence of Mastication on Orthodontic Wire Sliding in Nickel–Titanium Brackets with Superelastic Wings},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {406},
  doi = {10.3390/jfb17080406}
}
Kostenlos starten →