EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Bioceramic Bone-Inspired Scaffolds Through Single-Step Melt-Extrusion 3D Printing for Segmental Defect Treatment

Aikaterini Dedeloudi iD, Pietro Maria Bertelli iD, Laura Martinez-Marcos, Thomas Quinten, Imre Lengyel iD, Sune K Andersen iD, Dimitrios A Lamprou iD

Journal of Functional Biomaterials · 23.09.2025 · 16 (10) · 358

DOI: 10.3390/jfb16100358 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 23.09.2025. Verfasst von Aikaterini Dedeloudi und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Pharmacy, Queen's University Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIA NIH HHS, NIH HHS, The study was supported by Johnson & Johnson Innovative Medicine, by the Engineering and Physical Sciences Research Council [grant number EP/T518074/1].

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for novel tissue engineering (TE) applications in bone tissue regeneration underscores the importance of exploring advanced manufacturing techniques and biomaterials for personalised treatment approaches. Three-dimensional printing (3DP) technology facilitates the development of implantable devices with intricate geometries, enabling patient-specific therapeutic solutions. Although Fused Filament Fabrication (FFF) and Direct Ink Writing (DIW) are widely utilised for fabricating bone-like implants, the need for multiple processing steps often prolongs the overall production time. In this study, a single-step melt-extrusion 3DP technique was performed to develop multi-material scaffolds including bioceramics, hydroxyapatite (HA), and β-tricalcium phosphate (TCP) in both their bioactive and calcined forms at 10% and 20% w/w, within polycaprolactone (PCL) matrices. Printing parameters were optimised, and physicochemical properties of all biomaterials and final forms were evaluated. Thermal degradation and surface morphology analyses assessed the consistency and distribution of the ceramics across the different formulations. The tensile testing of the scaffolds defined the impact of each ceramic type and wt% on scaffold flexibility performance, while in vitro cell studies determined the cytocompatibility efficiency. Hence, all 3D-printed PCL–ceramic composite scaffolds achieved structural integrity and physicochemical and thermal stability. The mechanical profile of extruded samples was relevant to the ceramic consistency, providing valuable insights for further mechanotransduction investigations. Notably, all materials showed high cell viability and proliferation, indicating strong biocompatibility. Therefore, this additive manufacturing (AM) process is a precise and fast approach for developing biomaterial-based scaffolds, with potential applications in surgical restoration and support of segmental bone defects.

Schlagwörter

Stichwörter der Autor:innen

3D printingbioceramicsbiocompatibilityimplantable scaffoldspolycaprolactone

Autor:innen und Institutionen

  • School of Pharmacy, Queen's University Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK.
  • Wellcome-Wolfson Institute for Experimental Medicine, School of Medicine, Dentistry and Biomedical Sciences, Queen's University Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK.
  • Johnson & Johnson Innovative Medicine, Oral Solids Development, Research & Development, Turnhoutseweg 30, 2340 Beerse, Belgium.

ORCID-Profile: Aikaterini Dedeloudi, Pietro Maria Bertelli, Imre Lengyel, Sune K Andersen, Dimitrios A Lamprou

Förderung

  • NIA NIH HHS
  • NIH HHS
  • The study was supported by Johnson & Johnson Innovative Medicine, by the Engineering and Physical Sciences Research Council [grant number EP/T518074/1]
  • Johnson & Johnson Innovative Medicine
  • Engineering and Physical Sciences Research Council
  • NIH

Zitieren

APA

Dedeloudi, A., Bertelli, P. M., Martinez-Marcos, L., Quinten, T., Lengyel, I., Andersen, S. K., & Lamprou, D. A. (2025). Development of Bioceramic Bone-Inspired Scaffolds Through Single-Step Melt-Extrusion 3D Printing for Segmental Defect Treatment. Journal of Functional Biomaterials, 16(10), 358. https://doi.org/10.3390/jfb16100358

Vancouver

Dedeloudi A, Bertelli PM, Martinez-Marcos L, Quinten T, Lengyel I, Andersen SK, et al. Development of Bioceramic Bone-Inspired Scaffolds Through Single-Step Melt-Extrusion 3D Printing for Segmental Defect Treatment. Journal of Functional Biomaterials. 2025;16(10):358. doi:10.3390/jfb16100358

BibTeX
@article{Dedeloudi2025,
  author = {Dedeloudi, Aikaterini and Bertelli, Pietro Maria and Martinez-Marcos, Laura and Quinten, Thomas and Lengyel, Imre and Andersen, Sune K and Lamprou, Dimitrios A},
  title = {Development of Bioceramic Bone-Inspired Scaffolds Through Single-Step Melt-Extrusion 3D Printing for Segmental Defect Treatment},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {16},
  number = {10},
  pages = {358},
  doi = {10.3390/jfb16100358}
}
Kostenlos starten →