3D‐Printed Bioceramic Scaffolds Reinforced by the In Situ Oriented Growth of Grains for Supercritical Bone Defect Reconstruction
Advanced Science · 2025
DOI: 10.1002/advs.202408459 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, 2025. Verfasst von Boqing Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center for Biomaterials, Sichuan University, 29 Wangjiang Road, Chengdu, 610064, P. R. China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Ceramics, Bone Regeneration. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Sichuan Science and Technology Program, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Porous calcium phosphate ceramics have attracted widespread attention owing to their excellent bioactivity. However, their poor mechanical properties severely limit their clinical applications. Significantly improving the mechanical strength of porous CaP ceramics while maintaining their bioactivity remains a major challenge. To address this issue, calcium sulfate is used to regulate the directional growth of hydroxyapatite grains during ceramic sintering. The in situ oriented grains can not only alleviate the stress concentration but also strengthen the bonding force between the ceramic grain boundaries. Calcium sulfate improves the release of active calcium ions from calcium phosphate ceramics, further enhancing their bioactivity and osteoinductivity in vivo. Transcriptome and proteome sequencing reveals that the in situ whisker‐reinforced ceramics increase the expression of proteins related to calcium ion binding and promote the expression of osteogenesis‐related proteins. In the supercritical bone defect repair model, repair of the defect is achieved within 3 months, with mechanical recovery reaching more than 70% of the autologous bone.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- National Engineering Research Center for Biomaterials, Sichuan University, 29 Wangjiang Road, Chengdu, 610064, P. R. China.
- College of Biomedical Engineering, Sichuan University, 29 Wangjiang Road, Chengdu, 610064, P. R. China.
- Department of Orthopedics, Qilu Hospital of Shandong University, 107 Wenhua Road, Jinan, 250000, P. R. China.
- Department of Orthopedics, Orthopedic Research Institute, West China Hospital, Sichuan University, 37 Guoxue Road, Chengdu, 610041, P. R. China.
ORCID-Profile: Boqing Zhang, Yujiang Fan
Förderung
- National Key Research and Development Program of China
- Sichuan Science and Technology Program
- China Postdoctoral Science Foundation
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Zhang, B., Wang, K., Gui, X., Wang, W., Song, P., Wu, L., Guo, L., Zhou, C., Fan, Y., & Zhang, X. (2025). 3D‐Printed Bioceramic Scaffolds Reinforced by the In Situ Oriented Growth of Grains for Supercritical Bone Defect Reconstruction. Advanced Science. https://doi.org/10.1002/advs.202408459
Vancouver
Zhang B, Wang K, Gui X, Wang W, Song P, Wu L, et al. 3D‐Printed Bioceramic Scaffolds Reinforced by the In Situ Oriented Growth of Grains for Supercritical Bone Defect Reconstruction. Advanced Science. 2025. doi:10.1002/advs.202408459
BibTeX
@article{Zhang2025,
author = {Zhang, Boqing and Wang, Kaixin and Gui, Xingyu and Wang, Wenzhao and Song, Ping and Wu, Lina and Guo, Likun and Zhou, Changchun and Fan, Yujiang and Zhang, Xingdong},
title = {3D‐Printed Bioceramic Scaffolds Reinforced by the In Situ Oriented Growth of Grains for Supercritical Bone Defect Reconstruction},
journal = {Advanced Science},
year = {2025},
doi = {10.1002/advs.202408459}
}
EUVIMED