Effect of Thermal Aging on Color Stability and Mechanical Properties of High-Density CAD/CAM Polymers Utilized for Provisional Restorations
Journal of Functional Biomaterials · 15.06.2025 · 16 (6) · 223
DOI: 10.3390/jfb16060223 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 15.06.2025. Verfasst von Rasha Alharthi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Clinical Dental Science Department, College of Dentistry, Princess Nourah bint Abdulrahman University, Riyadh 11671, Saudi Arabia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam Bin Abdulaziz University, Princess Nourah bint Abdulrahman University Researchers, Princess Nourah bint Abdulrahman University Researchers Supporting Project.
Abstract (Originalsprache)
Background
This study evaluated and compared the effects of thermal aging on the color stability and mechanical properties of CAD/CAM polymers utilized for provisional restorations. Material and Methods: Three CAD/CAM polymers in this study: CAD-Temp (CAT), Everest C-Temp (CT), and PEEK (PK). Forty specimens of each material were randomly assigned to two subgroups. Subgroup A was immersed in distilled water for 24 h, whereas Subgroup B was subjected to 5000 thermal cycles. The color stability, flexural strength (FS), survival probability, and microstructures were evaluated following thermal cycling. Data analysis was conducted utilizing two-way ANOVA along with Tukey’s test.
Results
The CAT (3.74 ± 0.39) and CT (3.51 ± 0.54) groups exhibited the highest color variations, while PEEK (2.95 ± 0.45) showed the lowest color change. The baseline groups showed that the CT group had the highest flexural strength value (p < 0.05). The flexural strength values of CAT and CT groups significantly decreased (p < 0.05) following thermal cycling. No significant decrease in FS was observed following thermal cycling in the Pk group (p = 0.16).
Conclusions
The color measurement and flexural strength outcomes were significantly influenced by CAD/CAM materials and thermal cycling. The CT group demonstrated superior flexural strength compared to the other groups, both before and after thermal cycling. The PK group shows the lowest color change compared to other groups. Regardless of aging condition, C-Temp and PEEK materials recorded the highest survival probability, a 95% significance level compared to CAD-Temp.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Clinical Dental Science Department, College of Dentistry, Princess Nourah bint Abdulrahman University, Riyadh 11671, Saudi Arabia.
- Conservative Dental Science Department, College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
- Prosthetic Dental Department, College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
- Prosthetic Dental Department, Faculty of Dentistry, National Benha University, Benha 13511, Egypt.
ORCID-Profile: Rasha Alharthi, Ali Robaian Alqahtani, Abdulrahman Almalki
Förderung
- Prince Sattam Bin Abdulaziz University
- Princess Nourah bint Abdulrahman University Researchers
- Princess Nourah bint Abdulrahman University Researchers Supporting Project
Zitieren
APA
Alharthi, R., Alqahtani, A. R., Alshehri, A. M., Almalki, A., Abozaed, H. W., Raffat Hussein, E. M., & Soliman, T. A. (2025). Effect of Thermal Aging on Color Stability and Mechanical Properties of High-Density CAD/CAM Polymers Utilized for Provisional Restorations. Journal of Functional Biomaterials, 16(6), 223. https://doi.org/10.3390/jfb16060223
Vancouver
Alharthi R, Alqahtani AR, Alshehri AM, Almalki A, Abozaed HW, Raffat Hussein EM, et al. Effect of Thermal Aging on Color Stability and Mechanical Properties of High-Density CAD/CAM Polymers Utilized for Provisional Restorations. Journal of Functional Biomaterials. 2025;16(6):223. doi:10.3390/jfb16060223
BibTeX
@article{Alharthi2025,
author = {Alharthi, Rasha and Alqahtani, Ali Robaian and Alshehri, Abdullah Mohammed and Almalki, Abdulrahman and Abozaed, Heba Wageh and Raffat Hussein, Eman Mohamed and Soliman, Tarek Ahmed},
title = {Effect of Thermal Aging on Color Stability and Mechanical Properties of High-Density CAD/CAM Polymers Utilized for Provisional Restorations},
journal = {Journal of Functional Biomaterials},
year = {2025},
volume = {16},
number = {6},
pages = {223},
doi = {10.3390/jfb16060223}
}
EUVIMED