Artificial Intelligence for Color Prediction and Esthetic Design in CAD/CAM Ceramic Restorations: A Systematic Review and Meta-Analyses
Künstliche Intelligenz zur Farbvorhersage und ästhetischen Gestaltung bei CAD/CAM-Keramikrestaurationen: systematische Übersicht und Metaanalysen
Prosthesis · 04.12.2025 · 7 (6) · 160
DOI: 10.3390/prosthesis7060160 ↗Auf einen Blick
15 Studien zeigen: KI-gestütztes CAD verkürzte die Kronenentwurfszeit und verbesserte mehrere Designmaße gegenüber konventionellem CAD.
Fragestellung
Wie genau und leistungsfähig ist KI für Farbvorhersage und automatisierte Kronengestaltung in CAD/CAM-Keramiken?
Methode
Systematische Übersicht mit random-effects-Metaanalysen zu Designzeit, internem Sitz, Finish-Line-Genauigkeit, Farbvorhersage, Morphologie und Kontakten.
Ergebnisse
15 Studien. KI-gestütztes CAD reduzierte die Designzeit (MD −88,7 s; 95 %-KI −134,5 bis −42,9; I2 = 72 %). Interner Sitz besser (MD −17,1 µm; 95 %-KI −26,2 bis −7,9; I2 = 90 %).
Einschränkungen
Morphologie und funktionelle Kontakte wurden nicht gepoolt, da Maße und Einheiten nicht kompatibel waren.
Schlussfolgerung der Autor:innen
KI für CAD/CAM-Dentistry zeigt praktisches Potenzial, besonders für die Effizienz der Entwurfszeit, mit positiven Signalen für internen Sitz, Finish-Line-Identifikation und Farbvorhersage; die klinische Umsetzung sollte vorsichtig erfolgen.
Kernaussagen
- KI-gestütztes CAD verkürzte die Designzeit gegenüber konventionellem CAD.
- Der interne Sitz war mit KI geringfügig besser.
- Farbvorhersagen lagen fast immer innerhalb der akzeptierten Schwelle.
Deutsche Zusammenfassung: KI-gestützt aus dem Original-Abstract erstellt; alle Zahlen wurden automatisch mit dem Original abgeglichen. Maßgeblich ist der Original-Abstract.
Kurz gefasst
Systematische Übersicht in der Zeitschrift Prosthesis, online erschienen am 04.12.2025. Verfasst von Carlos M. Ardila und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: Artificial intelligence (AI) is increasingly embedded in CAD/CAM workflows to address persistent challenges in restorative dentistry, including unpredictable color outcomes and time-intensive crown design steps. Yet, evidence on its accuracy and efficiency remains fragmented across heterogeneous study designs and metrics. This systematic review and meta-analyses aimed to evaluate the accuracy and performance of AI for color prediction and automated crown design in CAD/CAM ceramics.
Methods
A systematic review with random-effects meta-analyses. The outcomes included design time, internal fit, finish-line accuracy, color-prediction acceptability using ΔE00 (AT00), morphology deviation, and occlusal and proximal contacts.
Results
Fifteen studies met the inclusion criteria. The meta-analyses showed that AI-equipped CAD reduced crown design time compared to conventional CAD (MD −88.7 s; 95% CI −134.5 to −42.9; I2 = 72%). The internal fit showed a small advantage for AI (MD −17.1 µm; 95% CI −26.2 to −7.9; I2 = 90%). For finish-line identification, the pooled mean Hausdorff distance was ~0.35 mm (95% CI 0.316–0.382; I2 = 0%). For color prediction, the pooled proportion of predictions within each study’s prespecified acceptability threshold (AT00) was near-universal (0.996; 95% CI 0.988–0.999; I2 = 0%). Morphology and functional contacts were not pooled due to incompatible metrics and units. Narrative synthesis indicated AI performance comparable to, or favorable over, conventional/technician workflows in selected regions.
Conclusions
AI for CAD/CAM dentistry shows practical promise, most clearly for design-time efficiency and with encouraging signals for internal fit, finish-line identification, and color-prediction acceptability under study thresholds. However, clinical translation should proceed cautiously.
Zitieren
APA
Ardila, C. M., Pulgarín-Medina, D. M., Pineda-Vélez, E., & Vivares-Builes, A. M. (2025). Artificial Intelligence for Color Prediction and Esthetic Design in CAD/CAM Ceramic Restorations: A Systematic Review and Meta-Analyses. Prosthesis, 7(6), 160. https://doi.org/10.3390/prosthesis7060160
Vancouver
Ardila CM, Pulgarín-Medina DM, Pineda-Vélez E, Vivares-Builes AM. Artificial Intelligence for Color Prediction and Esthetic Design in CAD/CAM Ceramic Restorations: A Systematic Review and Meta-Analyses. Prosthesis. 2025;7(6):160. doi:10.3390/prosthesis7060160
BibTeX
@article{Ardila2025,
author = {Ardila, Carlos M. and Pulgarín-Medina, Diana María and Pineda-Vélez, Eliana and Vivares-Builes, Anny M.},
title = {Artificial Intelligence for Color Prediction and Esthetic Design in CAD/CAM Ceramic Restorations: A Systematic Review and Meta-Analyses},
journal = {Prosthesis},
year = {2025},
volume = {7},
number = {6},
pages = {160},
doi = {10.3390/prosthesis7060160}
}
EUVIMED