EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Personalized 3D-Printed Prostheses for Bone Defect Reconstruction After Tumor Resection in the Foot and Ankle

Chang-Jin Yon iD, Byung-Chan Choi iD, Jung-Min Lee, Si-Wook Lee

Journal of Functional Biomaterials · 11.02.2025 · 16 (2) · 62

DOI: 10.3390/jfb16020062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 11.02.2025. Verfasst von Chang-Jin Yon und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedic Surgery, Keimyung University Dongsan Hospital, Keimyung University School of Medicine, Daegu 42601, Republic of Korea. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute for Advancement of Technology, KIAT (Korea Institute for Advancement of Technology).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D)-printing technology is revolutionizing orthopedic oncology by providing precise, customized solutions for complex bone defects following tumor resection. Traditional modular endoprostheses are prone to complications such as fretting corrosion and implant failure, underscoring the need for innovative approaches. This case series reports on three patients treated with 3D-printed, patient-specific prostheses and cutting guides. Preoperative CT and MRI data were used to design implants tailored to each patient’s anatomy, manufactured using electron beam melting technology with a titanium–aluminum–vanadium alloy. Functional outcomes showed significant improvements: in Case I, AOFAS improved from 71 to 96, and VAS decreased from 6 to 1; in Case II, AOFAS increased from 65 to 79, and VAS decreased from 5 to 3. Radiographic evaluations demonstrated stable prosthesis placement and early evidence of bone integration in Cases I and II, while in Case III, localized disease control was achieved before systemic progression. This case series highlights the transformative potential of 3D-printed prostheses in addressing the challenges of reconstructing anatomically complex defects. By enabling precise tumor resection and improving functional outcomes, this approach can advance current practices in orthopedic oncology. Further research should explore larger cohorts and use cost-effectiveness analyses to validate these findings and facilitate broader clinical adoption.

Schlagwörter

Stichwörter der Autor:innen

bone defect reconstructionorthopedic oncologypatient-specific prosthesisthree-dimensional printing

Autor:innen und Institutionen

  • Department of Orthopedic Surgery, Keimyung University Dongsan Hospital, Keimyung University School of Medicine, Daegu 42601, Republic of Korea.

ORCID-Profile: Chang-Jin Yon, Byung-Chan Choi

Förderung

  • Korea Institute for Advancement of Technology
  • KIAT (Korea Institute for Advancement of Technology)

Zitieren

APA

Yon, C. J., Choi, B. C., Lee, J. M., & Lee, S. W. (2025). Personalized 3D-Printed Prostheses for Bone Defect Reconstruction After Tumor Resection in the Foot and Ankle. Journal of Functional Biomaterials, 16(2), 62. https://doi.org/10.3390/jfb16020062

Vancouver

Yon CJ, Choi BC, Lee JM, Lee SW. Personalized 3D-Printed Prostheses for Bone Defect Reconstruction After Tumor Resection in the Foot and Ankle. Journal of Functional Biomaterials. 2025;16(2):62. doi:10.3390/jfb16020062

BibTeX
@article{Yon2025,
  author = {Yon, Chang-Jin and Choi, Byung-Chan and Lee, Jung-Min and Lee, Si-Wook},
  title = {Personalized 3D-Printed Prostheses for Bone Defect Reconstruction After Tumor Resection in the Foot and Ankle},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {16},
  number = {2},
  pages = {62},
  doi = {10.3390/jfb16020062}
}
Kostenlos starten →