EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Lubricant and Nanofiller Additives on Drilling Temperature in GFRP Composites

Mohamed Slamani, Jean-François Chatelain, Siwar Jammel

Journal of Composites Science · 12.10.2025 · 9 (10) · 558

DOI: 10.3390/jcs9100558 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 12.10.2025. Verfasst von Mohamed Slamani und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Glass fiber-reinforced polymer (GFRP) composites are highly susceptible to thermal damage during machining, which can compromise their structural integrity and final quality. This study examines the efficacy of graphene and wax additives in reducing drilling temperatures in GFRP composites. Nine unique samples were manufactured with varying weight percentages of wax (0%, 1%, 2%) and graphene (0%, 0.25%, 2%). Drilling experiments were performed on a CNC milling center under a range of cutting parameters, with temperature monitoring carried out using an infrared thermal camera. A hierarchical cubic response surface model was employed to analyze thermal behavior. The results indicate that cutting speed is the dominant factor, accounting for 67.28% of temperature generation. The formulation containing 2% wax and 0% graphene achieved the lowest average drilling temperature (64.64 °C), underscoring wax’s superior performance as both a lubricant and heat sink. Although graphene alone slightly elevated median temperatures, it substantially reduced thermal variability. The optimal condition for minimizing thermal damage was identified as 2% wax combined with a high cutting speed (200 mm/min), providing actionable insights for industrial process optimization.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Slamani, M., Chatelain, J., & Jammel, S. (2025). The Effect of Lubricant and Nanofiller Additives on Drilling Temperature in GFRP Composites. Journal of Composites Science, 9(10), 558. https://doi.org/10.3390/jcs9100558

Vancouver

Slamani M, Chatelain J, Jammel S. The Effect of Lubricant and Nanofiller Additives on Drilling Temperature in GFRP Composites. Journal of Composites Science. 2025;9(10):558. doi:10.3390/jcs9100558

BibTeX
@article{Slamani2025,
  author = {Slamani, Mohamed and Chatelain, Jean-François and Jammel, Siwar},
  title = {The Effect of Lubricant and Nanofiller Additives on Drilling Temperature in GFRP Composites},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {10},
  pages = {558},
  doi = {10.3390/jcs9100558}
}
Kostenlos starten →