Effect of graphene addition on tensile, flexural, and hardness behavior of GFRP composites
PLOS One · 23.01.2026 · 21 (1) · e0340894
DOI: 10.1371/journal.pone.0340894 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 23.01.2026. Verfasst von Siraganahalli N Nagesh und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty, Department of Mechanical Engineering, Ramaiah Institute of Technology, Bengaluru, India. Hauptthemen laut MEDLINE: Graphite, Glass, Polymers, Composite Resins. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polymer Matrix Composites represent a new generation of engineering materials in which matrix materials are altered by reinforcing filler materials to enhance strength and other properties. In the present work, the Glass fiber reinforced polymer (GFRP) composites were fabricated by adding different compositions of Graphene as a Nano filler material using the Hand layup technique, followed by the Vacuum bagging process. The Graphene filler material was varied from 0 wt. %, 2 wt. %, and 4 wt. %. The prepared composites were characterized by subjecting them to various mechanical tests such as tensile test, flexural test, and micro hardness test. The experimental results revealed an increase in tensile strength by 5.48%, flexural strength by 27.74%, and a reduction in microhardness by 20% for 4 wt. % filler added GFRP compared to neat GFRP, indicating reduced brittleness and enhanced ductility. Furthermore, addition of graphene resulted in a 9% increase in elongation and improved interfacial bonding between glass fiber and epoxy matrix was observed. Scanning electron microscopy (SEM) analysis confirmed uniform graphene dispersion, reduced voids, and improved fiber–matrix adhesion. The results demonstrate that the inclusion of 4 wt. % graphene filler achieves an optimal balance between strength, flexibility, and interfacial bonding, making these composites suitable for structural and lightweight applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Faculty, Department of Mechanical Engineering, Ramaiah Institute of Technology, Bengaluru, India.
- Faculty, Department of Mechanical Engineering, Presidency University, Bengaluru, India.
- Centre for Research Impact & Outcome, Chikara University Institule of Engineering and Technology, Chitkara University, Rajpura, Punjab, India.
- Research and Innovation Cell, Rayat Bahra University, Mohali, Punjab, India.
- Research and Innovation Cell, Bahra University, Waknaghat, India.
- Centre of Studies in Oil and Gas Engineering and Technology(CS-OGET), Eduardo Mondlane University, Bairro Luís Cabral, Maputo, Mozambique.
ORCID-Profile: Chamarajanagar G Ramachandra, Gabr Goshu Syum
Zitieren
APA
Nagesh, S. N., Ramachandra, C. G., Aruna Kumara, P. C., Kanti, P. K., Prakash, C., Kumar, S., Syum, G. G., & Bhat, A. (2026). Effect of graphene addition on tensile, flexural, and hardness behavior of GFRP composites. PLOS One, 21(1), e0340894. https://doi.org/10.1371/journal.pone.0340894
Vancouver
Nagesh SN, Ramachandra CG, Aruna Kumara PC, Kanti PK, Prakash C, Kumar S, et al. Effect of graphene addition on tensile, flexural, and hardness behavior of GFRP composites. PLOS One. 2026;21(1):e0340894. doi:10.1371/journal.pone.0340894
BibTeX
@article{Nagesh2026,
author = {Nagesh, Siraganahalli N and Ramachandra, Chamarajanagar G and Aruna Kumara, Pallagatte C and Kanti, Praveen Kumar and Prakash, Chander and Kumar, Sandeep and Syum, Gabr Goshu and Bhat, Archana},
title = {Effect of graphene addition on tensile, flexural, and hardness behavior of GFRP composites},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {1},
pages = {e0340894},
doi = {10.1371/journal.pone.0340894}
}
EUVIMED