Wire-Based Additive Manufacturing of Multi-Material Structures: A Review
Journal of Composites Science · 02.10.2025 · 9 (10) · 534
DOI: 10.3390/jcs9100534 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 02.10.2025. Verfasst von Xing Kang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 173 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Project of the State Key Laboratory of Solidification Technology at Northwestern Polytechnical University, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Multi-material structures have great potential in high-end fields such as aerospace and energy. Which integrate the advantages of various metals and meet the demands of complex working conditions. Among additive manufacturing technologies for multi-material structures, wire-based processes have become a research hotspot due to their high material utilization, low cost, and high efficiency. This article systematically reviews the progress of research on this technology. The working principles and characteristics of common heat sources (WAAM, LWAM, EBAM) are introduced. Furthermore, the advantages and limitations of these heat sources for manufacturing multi-material structures are critically analyzed. Moreover, various metal wire combination systems (such as steel/Ni, Al/steel, Ti/Al, and Cu/Ti, etc.) were reviewed, and the differences and influences of different wire feeding methods and directions were discussed. The review highlights research findings on microstructure regulation, interfacial bonding mechanisms, and the mechanical property optimization of polymetallic structures. The influence laws of critical process parameters on structural properties are also elucidated. The existing problems in the current research were pointed out, and the future development trends were prospected. Unlike previous articles, this review establishes a more comprehensive process–structure–performance framework through the discussion of integrated heat source characteristics, wire feeding systems, and interface adjustment strategies. It aims to provide references for promoting the development and engineering application of additive manufacturing technology for wire-based multi-metal structures.
Förderung
- National Natural Science Foundation of China
- Open Project of the State Key Laboratory of Solidification Technology at Northwestern Polytechnical University
- Fundamental Research Funds for the Central Universities
- basic scientific research projects for universities and the microstructure evolution mechanism during forming process of materials extreme environment applicat…
- National Key Research and Development Program of the Ministry of Science and Technology
Zitieren
APA
Kang, X., Li, G., Jiang, W., Li, F., Wang, Y., Wang, X., Zeng, Q., & Fan, X. (2025). Wire-Based Additive Manufacturing of Multi-Material Structures: A Review. Journal of Composites Science, 9(10), 534. https://doi.org/10.3390/jcs9100534
Vancouver
Kang X, Li G, Jiang W, Li F, Wang Y, Wang X, et al. Wire-Based Additive Manufacturing of Multi-Material Structures: A Review. Journal of Composites Science. 2025;9(10):534. doi:10.3390/jcs9100534
BibTeX
@article{Kang2025,
author = {Kang, Xing and Li, Guangyu and Jiang, Wenming and Li, Fafa and Wang, Yuejia and Wang, Xiaoqiong and Zeng, Qiantong and Fan, Xiuru},
title = {Wire-Based Additive Manufacturing of Multi-Material Structures: A Review},
journal = {Journal of Composites Science},
year = {2025},
volume = {9},
number = {10},
pages = {534},
doi = {10.3390/jcs9100534}
}
EUVIMED