EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemical Anodization-Induced {001} Facet Exposure in A-TiO2 for Improved DSSC Efficiency

Jolly Mathew, Shyju Thankaraj Salammal, Anandhi Sivaramalingam, Paulraj Manidurai

Journal of Composites Science · 01.09.2025 · 9 (9) · 462

DOI: 10.3390/jcs9090462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 01.09.2025. Verfasst von Jolly Mathew und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We developed dye-sensitized solar cells based on anatase–titanium dioxide (A-TiO2) nanotubes (TiNTs) and nanocubes (TiNcs) with {001} crystal facets generated using simple and facile electrochemical anodization. We also demonstrated a simple way of developing one-dimensional, two-dimensional, and three-dimensional self-assembled TiO2 nanostructures via electrochemical anodization, using them as an electron-transporting layer in DSSCs. TiNTs maintain tubular arrays for a limited time before becoming nanocrystals with {001} facets. Using FESEM and TEM, we observed that the TiO2 nanobundles were transformed into nanocubes with {001} facets and lower fluorine concentrations. Optimizing the reaction approach resulted in better-ordered, crystalline anatase TiNTs/Ncs being formed on the Ti metal foil. The anatase phase of as-grown TiO2 was confirmed by XRD, with (101) being the predominant intensity and preferred orientation. The nanostructured TiO2 had lattice values of a = 3.77–3.82 and c = 9.42–9.58. The structure and morphology of these as-grown materials were studied to understand the growth process. The photoconversion efficiency and impedance spectra were explored to analyze the performance of the designed DSSCs, employing N719 dye as a sensitizer and the I−/I3− redox pair as electrolytes, sandwiched with a Pt counter-electrode. As a result, we found that self-assembled TiNTs/Ncs presented a more effective photoanode in DSSCs than standard TiO2 (P25). TiNcs (0.5 and 0.25 NH4F) and P25 achieved the highest power conversion efficiencies of 3.47, 3.41, and 3.25%, respectively. TiNcs photoanodes have lower charge recombination capability and longer electron lifetimes, leading to higher voltage, photocurrent, and photovoltaic performance. These findings show that electrochemical anodization is an effective method for preparing TiNTs/Ncs and developing low-cost, highly efficient DSSCs by fine-tuning photoanode structures and components.

Zitieren

APA

Mathew, J., Salammal, S. T., Sivaramalingam, A., & Manidurai, P. (2025). Electrochemical Anodization-Induced {001} Facet Exposure in A-TiO2 for Improved DSSC Efficiency. Journal of Composites Science, 9(9), 462. https://doi.org/10.3390/jcs9090462

Vancouver

Mathew J, Salammal ST, Sivaramalingam A, Manidurai P. Electrochemical Anodization-Induced {001} Facet Exposure in A-TiO2 for Improved DSSC Efficiency. Journal of Composites Science. 2025;9(9):462. doi:10.3390/jcs9090462

BibTeX
@article{Mathew2025,
  author = {Mathew, Jolly and Salammal, Shyju Thankaraj and Sivaramalingam, Anandhi and Manidurai, Paulraj},
  title = {Electrochemical Anodization-Induced 001 Facet Exposure in A-TiO2 for Improved DSSC Efficiency},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {9},
  pages = {462},
  doi = {10.3390/jcs9090462}
}
Kostenlos starten →