EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Polylactic Acid/Carbon Fiber-Reinforced Biomedical Composites (PLA/CFRCs) with Multi-Walled Carbon Nanotube (MWCNT) Fillers: A Comparative Study on Reinforcing Techniques

Juan Antonio Paz-González, Yadira Gochi-Ponce, Carlos Velasco-Santos, Enrique Alcudia-Zacarias, Arturo Zizumbo-López, Balter Trujillo-Navarrete, Oscar Adrián Morales-Contreras, Luis Jesús Villarreal-Gómez

Journal of Composites Science · 29.03.2025 · 9 (4) · 167

DOI: 10.3390/jcs9040167 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 29.03.2025. Verfasst von Juan Antonio Paz-González und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Faculty of Engineering Sciences and Technology, Autonomous University of Baja California.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The limited mechanical properties of composite materials, including stiffness, strength, and biocompatibility, restrict their effectiveness in biomedical applications. This research enhanced the mechanical properties and biocompatibility of polylactic acid and carbon fiber-reinforced composites (PLA/CFRCs) by incorporating multi-walled carbon nanotube (MWCNT) fillers. The methodology involved synthesizing MWCNTs and integrating them into PLA/CFRC laminates using fusion-blending, dispersion, and interlaminar spray-coating. Raman spectroscopy confirmed the presence of MWCNTs, with characteristic D and G band peaks and an ID/IG of 1.44 ± 0.089. SEM revealed MWCNTs in the PLA/CFRC matrix and allowed size determination, with an outer diameter range of 125–150 nm and a length of 14,407 ± 2869 nm. FTIR identified interactions between the matrix and the MWCNTs, evidenced by band shifts. TGA/DSC analysis showed thermal stability above 338 °C for all composites. The tensile tests revealed that all composites had values greater than 19 GPa for the elastic modulus and 232 MPa for the ultimate strength. Cytotoxicity assays confirmed biocompatibility, and all samples maintained a cell growth rate greater than 80%. This study highlighted the potential of nanotechnology to optimize the mechanical behavior of polymer-based composites, expanding their applicability in biomedical fields.

Förderung

  • the Faculty of Engineering Sciences and Technology, Autonomous University of Baja California

Zitieren

APA

Paz-González, J. A., Gochi-Ponce, Y., Velasco-Santos, C., Alcudia-Zacarias, E., Zizumbo-López, A., Trujillo-Navarrete, B., Morales-Contreras, O. A., & Villarreal-Gómez, L. J. (2025). Enhancing Polylactic Acid/Carbon Fiber-Reinforced Biomedical Composites (PLA/CFRCs) with Multi-Walled Carbon Nanotube (MWCNT) Fillers: A Comparative Study on Reinforcing Techniques. Journal of Composites Science, 9(4), 167. https://doi.org/10.3390/jcs9040167

Vancouver

Paz-González JA, Gochi-Ponce Y, Velasco-Santos C, Alcudia-Zacarias E, Zizumbo-López A, Trujillo-Navarrete B, et al. Enhancing Polylactic Acid/Carbon Fiber-Reinforced Biomedical Composites (PLA/CFRCs) with Multi-Walled Carbon Nanotube (MWCNT) Fillers: A Comparative Study on Reinforcing Techniques. Journal of Composites Science. 2025;9(4):167. doi:10.3390/jcs9040167

BibTeX
@article{PazGonzlez2025,
  author = {Paz-González, Juan Antonio and Gochi-Ponce, Yadira and Velasco-Santos, Carlos and Alcudia-Zacarias, Enrique and Zizumbo-López, Arturo and Trujillo-Navarrete, Balter and Morales-Contreras, Oscar Adrián and Villarreal-Gómez, Luis Jesús},
  title = {Enhancing Polylactic Acid/Carbon Fiber-Reinforced Biomedical Composites (PLA/CFRCs) with Multi-Walled Carbon Nanotube (MWCNT) Fillers: A Comparative Study on Reinforcing Techniques},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {4},
  pages = {167},
  doi = {10.3390/jcs9040167}
}
Kostenlos starten →