Optimization of Innovative Hybrid Polylactic Acid+ and Glass Fiber Composites: Mechanical, Physical, and Thermal Evaluation of Woven Glass Fiber Reinforcement in Fused Filament Fabrication 3D Printing
Journal of Composites Science · 29.03.2025 · 9 (4) · 164
DOI: 10.3390/jcs9040164 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 29.03.2025. Verfasst von Ardi Jati Nugroho Putro und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indonesia Endowment Fund for Education (LPDP), Republic of Indonesia.
Abstract (Originalsprache)
The growing demand for complex structures, energy absorption, and mechanically strong materials has led to the exploration of innovative composites. This study focuses on the manufacture, characterization, and evaluation of PLA+ reinforced with woven glass fiber. Using Fused Filament Fabrication (FFF) 3D Printer technology, the effects of adding woven glass fiber were examined through a tensile test with Digital Image Correlation (DIC)-induced, flexural, Charpy impact resistance, Shore D hardness, Differential Scanning Calorimetry (DSC) thermal tester, and SEM morphological tests. Results showed that adding four layers of glass fiber significantly improved mechanical properties: tensile strength increased by 85% to 95.44 MPa, flexural strength by 13% to 91.51 MPa, and impact resistance by 450% to 15.12 kJ/m2. However, a reduction in hardness and thermal resistance was noted due to chemical interactions. These findings suggest potential applications of PLA+ composites in high-strength products for vehicle bumpers in the automotive industry and shin pads in the sports industry.
Förderung
- Indonesia Endowment Fund for Education (LPDP), Republic of Indonesia
Zitieren
APA
Putro, A. J. N., Bagaskara, G., Prasetya, I. A., Jamasri, Wiranata, A., Wu, Y., & Muflikhun, M. A. (2025). Optimization of Innovative Hybrid Polylactic Acid+ and Glass Fiber Composites: Mechanical, Physical, and Thermal Evaluation of Woven Glass Fiber Reinforcement in Fused Filament Fabrication 3D Printing. Journal of Composites Science, 9(4), 164. https://doi.org/10.3390/jcs9040164
Vancouver
Putro AJN, Bagaskara G, Prasetya IA, Jamasri, Wiranata A, Wu Y, et al. Optimization of Innovative Hybrid Polylactic Acid+ and Glass Fiber Composites: Mechanical, Physical, and Thermal Evaluation of Woven Glass Fiber Reinforcement in Fused Filament Fabrication 3D Printing. Journal of Composites Science. 2025;9(4):164. doi:10.3390/jcs9040164
BibTeX
@article{Putro2025,
author = {Putro, Ardi Jati Nugroho and Bagaskara, Galang and Prasetya, Ibnu Adnan and Jamasri and Wiranata, Ardi and Wu, Yi-Chieh and Muflikhun, Muhammad Akhsin},
title = {Optimization of Innovative Hybrid Polylactic Acid+ and Glass Fiber Composites: Mechanical, Physical, and Thermal Evaluation of Woven Glass Fiber Reinforcement in Fused Filament Fabrication 3D Printing},
journal = {Journal of Composites Science},
year = {2025},
volume = {9},
number = {4},
pages = {164},
doi = {10.3390/jcs9040164}
}
EUVIMED