EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced 3D Printing of Polyetherketoneketone Hydroxyapatite Composites via Fused Filament Fabrication with Increased Interlayer Connection

Krzysztof Rodzeń, Eiméar O'Donnell, Frances Hasson iD, Alistair McIlhagger, Brian J Meenan iD, Jawad Ullah, Beata Strachota, Adam Strachota iD, Sean Duffy, Adrian Boyd iD

Materials · 27.06.2024 · 17 (13) · 3161

DOI: 10.3390/ma17133161 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.06.2024. Verfasst von Krzysztof Rodzeń und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Ulster University, York St, Belfast BT15 1ED, UK. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SEPUB, European Union’s INTERREG VA Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additively manufactured implants, surgical guides, and medical devices that would have direct contact with the human body require predictable behaviour when stress is applied during their standard operation. Products built with Fused Filament Fabrication (FFF) possess orthotropic characteristics, thus, it is necessary to determine the properties that can be achieved in the XY- and Z-directions of printing. A concentration of 10 wt% of hydroxyapatite (HA) in polyetherketoneketone (PEKK) matrix was selected as the most promising biomaterial supporting cell attachment for medical applications and was characterized with an Ultimate Tensile Strength (UTS) of 78.3 MPa and 43.9 MPa in the XY- and Z-directions of 3D printing, respectively. The effect of the filler on the crystallization kinetics, which is a key parameter for the selection of semicrystalline materials suitable for 3D printing, was explained. This work clearly shows that only in situ crystallization provides the ability to build parts with a more thermodynamically stable primary form of crystallites.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingadvanced semicrystalline polymerscrystallization kineticshydroxyapatitepolyetherketoneketone

Autor:innen und Institutionen

  • School of Engineering, Ulster University, York St, Belfast BT15 1ED, UK.
  • Institute of Macromolecular Chemistry v.v.i., Academy of Sciences of the Czech Republic, Heyrovskeho nam. 2, 162 00 Praha, Czech Republic.

ORCID-Profile: Frances Hasson, Brian J Meenan, Adam Strachota, Adrian Boyd

Förderung

  • SEPUB
  • European Union’s INTERREG VA Programme

Zitieren

APA

Rodzeń, K., O'Donnell, E., Hasson, F., McIlhagger, A., Meenan, B. J., Ullah, J., Strachota, B., Strachota, A., Duffy, S., & Boyd, A. (2024). Advanced 3D Printing of Polyetherketoneketone Hydroxyapatite Composites via Fused Filament Fabrication with Increased Interlayer Connection. Materials, 17(13), 3161. https://doi.org/10.3390/ma17133161

Vancouver

Rodzeń K, O'Donnell E, Hasson F, McIlhagger A, Meenan BJ, Ullah J, et al. Advanced 3D Printing of Polyetherketoneketone Hydroxyapatite Composites via Fused Filament Fabrication with Increased Interlayer Connection. Materials. 2024;17(13):3161. doi:10.3390/ma17133161

BibTeX
@article{Rodze2024,
  author = {Rodzeń, Krzysztof and O'Donnell, Eiméar and Hasson, Frances and McIlhagger, Alistair and Meenan, Brian J and Ullah, Jawad and Strachota, Beata and Strachota, Adam and Duffy, Sean and Boyd, Adrian},
  title = {Advanced 3D Printing of Polyetherketoneketone Hydroxyapatite Composites via Fused Filament Fabrication with Increased Interlayer Connection},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3161},
  doi = {10.3390/ma17133161}
}
Kostenlos starten →