Optimising Additive Manufacturing to Produce PLA Sandwich Structures by Varying Cell Type and Infill: Effect on Flexural Properties
Journal of Composites Science · 14.09.2024 · 8 (9) · 360
DOI: 10.3390/jcs8090360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 14.09.2024. Verfasst von Gabriele Marabello und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The objective of this research is to optimize additive manufacturing processes, specifically Fused Filament Fabrication (FFF) techniques, to produce sandwich structures. Mono-material specimens made of polylactic acid (PLA) were produced, where both the skin and core were fabricated in a single print. To optimize the process, variations were made in both the base cell geometry of the core (Tri-Hexagon and Gyroid) and the core infill (5%, 25%, 50%, and 75%), evaluating their effects on static three-point bending behavior. Optical microscopy was employed to assess both the structure generated by additive manufacturing and the fracture modes. The findings reveal that increasing the infill, and thus the core density, enhances the mechanical properties of the structure, although the improvement is such that samples with 50% infill already demonstrate excellent performance. The difference between hexagonal and Gyroid structures is not significant. Based on microscopic analyses, it is believed that the evolution of 3D printers, from open to closed chamber designs, could significantly improve the deposition of the various layers.
Zitieren
APA
Marabello, G., Chairi, M., & Bella, G. D. (2024). Optimising Additive Manufacturing to Produce PLA Sandwich Structures by Varying Cell Type and Infill: Effect on Flexural Properties. Journal of Composites Science, 8(9), 360. https://doi.org/10.3390/jcs8090360
Vancouver
Marabello G, Chairi M, Bella GD. Optimising Additive Manufacturing to Produce PLA Sandwich Structures by Varying Cell Type and Infill: Effect on Flexural Properties. Journal of Composites Science. 2024;8(9):360. doi:10.3390/jcs8090360
BibTeX
@article{Marabello2024,
author = {Marabello, Gabriele and Chairi, Mohamed and Bella, Guido Di},
title = {Optimising Additive Manufacturing to Produce PLA Sandwich Structures by Varying Cell Type and Infill: Effect on Flexural Properties},
journal = {Journal of Composites Science},
year = {2024},
volume = {8},
number = {9},
pages = {360},
doi = {10.3390/jcs8090360}
}
EUVIMED