Minimizing Porosity in 17-4 PH Stainless Steel Compacts in a Modified Powder Metallurgical Process
Journal of Composites Science · 16.07.2024 · 8 (7) · 277
DOI: 10.3390/jcs8070277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 16.07.2024. Verfasst von Tamás Mikó und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Nowadays, powder-based manufacturing processes are recognized as cost-efficient methods frequently employed for producing parts with intricate shapes and tight tolerances in large quantities. However, like any manufacturing method, powder-based technologies also have several disadvantages. One of the most significant issues lies in the degree of porosity. By modifying the morphology of the gas-atomized spherical 17-4PH stainless steel powder via prior ball milling and then raising both the pressure of cold compaction (1.6 GPa) and sintering temperature (1275 °C), the porosity could be reduced considerably. In our novel powder metallurgical (PM) experimental process, an exceptionally high green density of 92% could be reached by employing die wall lubrication instead of internal lubrication and utilizing induction heating for rapid sintering. After sintering (at temperatures of 1200, 1250, and 1275 °C), the samples aged in the H900 condition were then mechanically tested (Charpy impact, HV hardness, and tensile tests) as a function of porosity. Sintering at 1275 °C for one hour enabled porosity reduction to below 4%, resulting in 1200 MPa yield strength and 1350 MPa ultimate tensile strength with significant (16%) fracture strain. These values are comparable to those of the same alloy products fabricated via ingot metallurgy (IM) or additive manufacturing (AM).
Zitieren
APA
Mikó, T., Markatos, D., Török, T. I., Szabó, G., & Gácsi, Z. (2024). Minimizing Porosity in 17-4 PH Stainless Steel Compacts in a Modified Powder Metallurgical Process. Journal of Composites Science, 8(7), 277. https://doi.org/10.3390/jcs8070277
Vancouver
Mikó T, Markatos D, Török TI, Szabó G, Gácsi Z. Minimizing Porosity in 17-4 PH Stainless Steel Compacts in a Modified Powder Metallurgical Process. Journal of Composites Science. 2024;8(7):277. doi:10.3390/jcs8070277
BibTeX
@article{Mik2024,
author = {Mikó, Tamás and Markatos, Dionysios and Török, Tamás I. and Szabó, Gábor and Gácsi, Zoltán},
title = {Minimizing Porosity in 17-4 PH Stainless Steel Compacts in a Modified Powder Metallurgical Process},
journal = {Journal of Composites Science},
year = {2024},
volume = {8},
number = {7},
pages = {277},
doi = {10.3390/jcs8070277}
}
EUVIMED