EUVIMEDEUVIMED entdecken
Crossref

Precipitation Hardening of the Additive-Manufactured 17-4 PH Stainless Steel for Medical Applications

Chonnakan Wittayawongsaruji, Pichanan Vissanuyothin, Athicha Jintawattanagul, Wathit Methabut, Siraphat Jintawattanagul, Chalothorn Thumthae, Sarum Boonmee

Journal of Biomimetics, Biomaterials and Biomedical Engineering · 20.05.2026 · 72 · 1-6

DOI: 10.4028/p-3udgxu ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomimetics, Biomaterials and Biomedical Engineering, online erschienen am 20.05.2026. Verfasst von Chonnakan Wittayawongsaruji und 6 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the impact of heat treatment parameters on the hardness and microstructure of 17-4PH stainless steel samples fabricated by additive manufacturing, with a focus on dimensional changes throughout the process. The additive manufacturing method used was Bound Metal Deposition (BMD), which includes digital scanning, 3D metal printing, sintering, and post-processing. It was observed that the printed parts undergo a substantial size increase 16.96% (height) and 18.14% (diameter) to compensate for material loss during the binder removal stage in sintering. Although the sintered parts shrink relative to the printed samples, they remain 3.25% taller and 6.05% wider than the original CAD dimensions. Following sintering, the samples underwent solution treatment and aging at various temperatures and times. Microstructural analysis post-solution treatment revealed a martensitic structure as the predominant phase. Aging caused the formation of strengthening precipitates, leading to peak hardness values of 422.0 and 303.0 HV0.5 at aging temperatures of 480 °C and 620 °C for 1 hour, respectively. Dimensional changes during the precipitation hardening stage were minimal and considered negligible.

Zitieren

APA

Wittayawongsaruji, C., Vissanuyothin, P., Jintawattanagul, A., Methabut, W., Jintawattanagul, S., Thumthae, C., & Boonmee, S. (2026). Precipitation Hardening of the Additive-Manufactured 17-4 PH Stainless Steel for Medical Applications. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 72, 1-6. https://doi.org/10.4028/p-3udgxu

Vancouver

Wittayawongsaruji C, Vissanuyothin P, Jintawattanagul A, Methabut W, Jintawattanagul S, Thumthae C, et al. Precipitation Hardening of the Additive-Manufactured 17-4 PH Stainless Steel for Medical Applications. Journal of Biomimetics, Biomaterials and Biomedical Engineering. 2026;72:1-6. doi:10.4028/p-3udgxu

BibTeX
@article{Wittayawongsaruji2026,
  author = {Wittayawongsaruji, Chonnakan and Vissanuyothin, Pichanan and Jintawattanagul, Athicha and Methabut, Wathit and Jintawattanagul, Siraphat and Thumthae, Chalothorn and Boonmee, Sarum},
  title = {Precipitation Hardening of the Additive-Manufactured 17-4 PH Stainless Steel for Medical Applications},
  journal = {Journal of Biomimetics, Biomaterials and Biomedical Engineering},
  year = {2026},
  volume = {72},
  pages = {1--6},
  doi = {10.4028/p-3udgxu}
}
Kostenlos starten →