EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties of Ultra-High Molecular Weight Polyethylene Produced by Cyclic Impact Compaction and Reinforced with Graphene Nanoplatelets and Single-Walled Carbon Nanotubes

Alexandr Shtertser, Boris Zlobin, Victor Kiselev, Sergei Shemelin, Vladislav Shikalov, Evgenij Karpov, Konstantin Ivanyuk

Journal of Composites Science · 31.07.2023 · 7 (8) · 314

DOI: 10.3390/jcs7080314 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 31.07.2023. Verfasst von Alexandr Shtertser und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-based composites represent a special class of materials in demand by the industry. In comparison with other polymers, ultra-high molecular weight polyethylene (UHMWPE) is characterized by exceptionally high wear and impact resistance. There are different technologies for producing bulk material from UHMWPE powder and from its mixtures with various reinforcing additives. In this work, samples for research were made by cyclic impact compaction (CIC), graphene nanoplatelets and single-walled carbon nanotubes (SWCNTs) were the reinforcing nanofillers. Nanoscale detonation carbon (NDC) produced by the detonation decomposition of acetylene was employed as a graphene nanofiller. The obtained samples were subjected to a wear test, and their hardness and tensile strength were measured. Studies have shown that the reinforcement of UHMWPE with NDC and SWCNTs leads to an increase in its hardness by 6.4% and 19.6%, respectively. With the same nanofillers, the wear resistance when rubbing against a steel ball rises by 1.13 and 1.63 times, and the coefficient of friction drops by 10% and 20%, respectively. Meanwhile, the tensile strength of UHMWPE drops by 11.7% and 40.4%, and the elongation by 11.9% and 30.1% when reinforcing UHMWPE with NDC and SWCNTs, respectively.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Shtertser, A., Zlobin, B., Kiselev, V., Shemelin, S., Shikalov, V., Karpov, E., & Ivanyuk, K. (2023). Properties of Ultra-High Molecular Weight Polyethylene Produced by Cyclic Impact Compaction and Reinforced with Graphene Nanoplatelets and Single-Walled Carbon Nanotubes. Journal of Composites Science, 7(8), 314. https://doi.org/10.3390/jcs7080314

Vancouver

Shtertser A, Zlobin B, Kiselev V, Shemelin S, Shikalov V, Karpov E, et al. Properties of Ultra-High Molecular Weight Polyethylene Produced by Cyclic Impact Compaction and Reinforced with Graphene Nanoplatelets and Single-Walled Carbon Nanotubes. Journal of Composites Science. 2023;7(8):314. doi:10.3390/jcs7080314

BibTeX
@article{Shtertser2023,
  author = {Shtertser, Alexandr and Zlobin, Boris and Kiselev, Victor and Shemelin, Sergei and Shikalov, Vladislav and Karpov, Evgenij and Ivanyuk, Konstantin},
  title = {Properties of Ultra-High Molecular Weight Polyethylene Produced by Cyclic Impact Compaction and Reinforced with Graphene Nanoplatelets and Single-Walled Carbon Nanotubes},
  journal = {Journal of Composites Science},
  year = {2023},
  volume = {7},
  number = {8},
  pages = {314},
  doi = {10.3390/jcs7080314}
}
Kostenlos starten →