Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers
Journal of Composites Science · 20.04.2023 · 7 (4) · 173
DOI: 10.3390/jcs7040173 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 20.04.2023. Verfasst von Antonio J. Paleo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT-Foundation for Science and Technology, FCT/PIDDAC through the Strategic Funds project, Project ANID PIA Anillo.
Abstract (Originalsprache)
The electrical conductivity (σ) and Seebeck coefficient (S) at temperatures from 40 °C to 100 °C of melt-processed polypropylene (PP) composites filled with 5 wt.% of industrial-grade carbon nanofibers (CNFs) is investigated. Transmission Electron Microscopy (TEM) of the two Pyrograf® III CNFs (PR 19 LHT XT and PR 24 LHT XT), used in the fabrication of the PP/CNF composites (PP/CNF 19 and PP/CNF 24), reveals that CNFs PR 24 LHT XT show smaller diameters than CNFs PR 19 LHT XT. In addition, this grade (PR 24 LHT XT) presents higher levels of graphitization as deduced by Raman spectroscopy. Despite these structural differences, both Pyrograf® III grades present similar σ (T) and S (T) dependencies, whereby the S shows negative values (n-type character). However, the σ (T) and S (T) of their derivative PP/CNF19 and PP/CNF24 composites are not analogous. In particular, the PP/CNF24 composite shows higher σ at the same content of CNFs. Thus, with an additionally slightly more negative S value, the PP/CNF24 composites present a higher power factor (PF) and figure of merit (zT) than PP/CNF19 composites at 40 °C. Moreover, while the σ (T) and S (T) of CNFs PR 19 LHT XT clearly drive the σ (T) and S (T) of its corresponding PP/CNF19 composite, the S (T) of CNFs PR 24 LHT XT does not drive the S (T) observed in their corresponding PP/CNF24 composite. Thus, it is inferred in PP/CNF24 composites an unexpected electron donation (n-type doping) from the PP to the CNFs PR 24 LHT XT, which could be activated when PP/CNF24 composites are subjected to that increase in temperature from 40 °C to 100 °C. All these findings are supported by theoretical modeling of σ (T) and S (T) with the ultimate aim of understanding the role of this particular type of commercial CNFs on the thermoelectrical properties of their PP/CNF composites.
Förderung
- FCT-Foundation for Science and Technology
- FCT/PIDDAC through the Strategic Funds project
- Project ANID PIA Anillo
Zitieren
APA
Paleo, A. J., Krause, B., Mendes, A. R., Tavares, C. J., Cerqueira, M. F., Muñoz, E., & Pötschke, P. (2023). Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers. Journal of Composites Science, 7(4), 173. https://doi.org/10.3390/jcs7040173
Vancouver
Paleo AJ, Krause B, Mendes AR, Tavares CJ, Cerqueira MF, Muñoz E, et al. Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers. Journal of Composites Science. 2023;7(4):173. doi:10.3390/jcs7040173
BibTeX
@article{Paleo2023,
author = {Paleo, Antonio J. and Krause, Beate and Mendes, Ana R. and Tavares, Carlos J. and Cerqueira, Maria F. and Muñoz, Enrique and Pötschke, Petra},
title = {Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers},
journal = {Journal of Composites Science},
year = {2023},
volume = {7},
number = {4},
pages = {173},
doi = {10.3390/jcs7040173}
}
EUVIMED