EUVIMEDEUVIMED entdecken
Crossref

Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration

Takashi Miura, Toshio Ogasawara, Takuya Aoki, Yuki Kubota, Keisuke Abe, Kosuke Kawakami

Journal of the American Ceramic Society · 2025-03 · 108 (3)

DOI: 10.1111/jace.20281 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 28.11.2024. Verfasst von Takashi Miura und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study objective is a proposal of a new lightweight and affordable structural material with heat resistance of 600–1000°C. We developed process technology and evaluated the mechanical properties of SiC fiber (Hi‐Nicalon)/Si‐CoSi 2 matrix composites. After Hi‐Nicalon fibers were woven into orthogonal three‐dimensional fabrics ( 40%), a carbon layer (FB‐C) was formed on the fiber surface using film boiling, serving as the fiber–matrix interface layer. To suppress Hi‐Nicalon strength degradation, Si‐22 at.% Co alloy with a lower melting point compared to pure Si was infiltrated at 1380°C to produce Hi‐Nicalon/FB‐C/Si‐CoSi 2 matrix composites. Dense composites with no open pores were obtained. Their bulk density was 2.7 g/cm 3 . Their mean value of four‐point bending strength was 460 MPa at room temperature and 612 MPa at 800°C in an Argon atmosphere. Fiber pullout and fiber bridging were observed clearly on the fracture surfaces. The FB‐C, with an average thickness of 4 µm, suppresses Hi‐Nicalon damage from the molten Si‐Co alloy. Furthermore, an inexpensive oxidation‐resistant coating of Si‐Co alloy dispersed with TiB 2 and SiC particles was formed on the composite surface. The four‐point bending strength in air was 424 MPa at 800°C and 539 MPa at 1200°C, demonstrating that the oxidation‐resistant coating functions effectively.

Zitieren

APA

Miura, T., Ogasawara, T., Aoki, T., Kubota, Y., Abe, K., & Kawakami, K. (2025). Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration. Journal of the American Ceramic Society, 108(3). https://doi.org/10.1111/jace.20281

Vancouver

Miura T, Ogasawara T, Aoki T, Kubota Y, Abe K, Kawakami K. Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration. Journal of the American Ceramic Society. 2025;108(3). doi:10.1111/jace.20281

BibTeX
@article{Miura2025,
  author = {Miura, Takashi and Ogasawara, Toshio and Aoki, Takuya and Kubota, Yuki and Abe, Keisuke and Kawakami, Kosuke},
  title = {Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration},
  journal = {Journal of the American Ceramic Society},
  year = {2025},
  volume = {108},
  number = {3},
  doi = {10.1111/jace.20281}
}
Kostenlos starten →