EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing of Dental Prostheses: Current and Emerging Applications

Fereshte Rezaie, Masoud Farshbaf, Mohammad Dahri iD, Moein Masjedi iD, Reza Maleki iD, Fatemeh Amini, Jonathan Wirth, Keyvan Moharamzadeh iD, Franz E Weber iD, Lobat Tayebi iD

Journal of Composites Science · 15.02.2023 · 7 (2) · 80

DOI: 10.3390/jcs7020080 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 15.02.2023. Verfasst von Fereshte Rezaie und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Endodontic, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz P.O. Box 5163639888, Iran. Die Arbeit wurde bisher 130-mal zitiert (Crossref) und nennt 168 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, National Institute of Dental and Craniofacial Research of the National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Revolutionary fabrication technologies such as three-dimensional (3D) printing to develop dental structures are expected to replace traditional methods due to their ability to establish constructs with the required mechanical properties and detailed structures. Three-dimensional printing, as an additive manufacturing approach, has the potential to rapidly fabricate complex dental prostheses by employing a bottom-up strategy in a layer-by-layer fashion. This new technology allows dentists to extend their degree of freedom in selecting, creating, and performing the required treatments. Three-dimensional printing has been narrowly employed in the fabrication of various kinds of prostheses and implants. There is still an on-demand production procedure that offers a reasonable method with superior efficiency to engineer multifaceted dental constructs. This review article aims to cover the most recent applications of 3D printing techniques in the manufacturing of dental prosthetics. More specifically, after describing various 3D printing techniques and their advantages/disadvantages, the applications of 3D printing in dental prostheses are elaborated in various examples in the literature. Different 3D printing techniques have the capability to use different materials, including thermoplastic polymers, ceramics, and metals with distinctive suitability for dental applications, which are discussed in this article. The relevant limitations and challenges that currently limit the efficacy of 3D printing in this field are also reviewed. This review article has employed five major scientific databases, including Google Scholar, PubMed, ScienceDirect, Web of Science, and Scopus, with appropriate keywords to find the most relevant literature in the subject of dental prostheses 3D printing.

Schlagwörter

Stichwörter der Autor:innen

3D printingdental crown and bridgedental implantsdental prostheses

Autor:innen und Institutionen

  • Department of Endodontic, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz P.O. Box 5163639888, Iran.
  • Department of Medical Nanotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz P.O. Box 5163639888, Iran.
  • Research Center for Pharmaceutical Nanotechnology, Biomedicine Institute, Tabriz University of Medical Sciences, Tabriz P.O. Box 5163639888, Iran.
  • Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz P.O. Box 6468571468, Iran.
  • Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran P.O. Box 33535111, Iran.
  • School of Dentistry, Shahed University of Medical Sciences, Tehran P.O. Box 5163639888, Iran.

ORCID-Profile: Mohammad Dahri, Moein Masjedi, Reza Maleki, Keyvan Moharamzadeh, Franz E Weber, Lobat Tayebi

Förderung

  • NIDCR NIH HHS
  • National Institute of Dental and Craniofacial Research of the National Institutes of Health

Zitieren

APA

Rezaie, F., Farshbaf, M., Dahri, M., Masjedi, M., Maleki, R., Amini, F., Wirth, J., Moharamzadeh, K., Weber, F. E., & Tayebi, L. (2023). 3D Printing of Dental Prostheses: Current and Emerging Applications. Journal of Composites Science, 7(2), 80. https://doi.org/10.3390/jcs7020080

Vancouver

Rezaie F, Farshbaf M, Dahri M, Masjedi M, Maleki R, Amini F, et al. 3D Printing of Dental Prostheses: Current and Emerging Applications. Journal of Composites Science. 2023;7(2):80. doi:10.3390/jcs7020080

BibTeX
@article{Rezaie2023,
  author = {Rezaie, Fereshte and Farshbaf, Masoud and Dahri, Mohammad and Masjedi, Moein and Maleki, Reza and Amini, Fatemeh and Wirth, Jonathan and Moharamzadeh, Keyvan and Weber, Franz E and Tayebi, Lobat},
  title = {3D Printing of Dental Prostheses: Current and Emerging Applications},
  journal = {Journal of Composites Science},
  year = {2023},
  volume = {7},
  number = {2},
  pages = {80},
  doi = {10.3390/jcs7020080}
}
Kostenlos starten →