EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Investigating the Physical, Mechanical and Thermal Performances of Sand/Soil/Recycled HDPE Composites

Etienne Malbila, Decroly Djoubissié Denouwé, Sabour Compaore, Dieudonné Dabilgou, Adamah Messan

Journal of Composites Science · 07.07.2026 · 10 (7) · 362

DOI: 10.3390/jcs10070362 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 07.07.2026. Verfasst von Etienne Malbila und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The recycling of waste into materials is a form of recovery that offers a double advantage, such as eco-sustainable sanitation and the availability of new ecological construction materials in Civil Engineering. The present study aimed to develop a composite eco-material based on sand, soil and recycled plastic waste melted using a Scheffler solar concentrator (SSC). Then, two types of mix were formulated: a sand/PW mix with ratios of 75/25, 70/30, 65/35 and 60/40, and a sand/soil/PW mix with a ratio of 60/30/10. The SSC enabled an internal melting temperature of 172.42 °C to be reached. Specimens measuring 4 × 4 × 16 cm3 were made and tested using 3-point bending, compression, capillary absorption and thermal tests. The best mechanical resistance was obtained with the 65/35 ratio of the sand/PW mix, with average values of 12.15 MPa in 3-point bending and 23.96 MPa in compression. This composite eco-material had a water absorption rate of 0.4% and a thermal diffusivity of 0.36 mm2/s. On the other hand, the sand/PW/laterite mix had a mechanical strength of 10.1 MPa in 3-point bending and 22.83 MPa in compression, with a water absorption rate of 2.3% and a thermal diffusivity of 0.44 mm2/s. In addition to these initial results, we plan to analyze the effect of thermal shock or wetting-drying cycles on the durability of this composite eco-material. As these properties comply with the established standards, the sand/soil/recycle HPDE composites can be used for applications such as pavers and tiles for interior flooring, and hollow and solid blocks.

Zitieren

APA

Malbila, E., Denouwé, D. D., Compaore, S., Dabilgou, D., & Messan, A. (2026). Preparation and Investigating the Physical, Mechanical and Thermal Performances of Sand/Soil/Recycled HDPE Composites. Journal of Composites Science, 10(7), 362. https://doi.org/10.3390/jcs10070362

Vancouver

Malbila E, Denouwé DD, Compaore S, Dabilgou D, Messan A. Preparation and Investigating the Physical, Mechanical and Thermal Performances of Sand/Soil/Recycled HDPE Composites. Journal of Composites Science. 2026;10(7):362. doi:10.3390/jcs10070362

BibTeX
@article{Malbila2026,
  author = {Malbila, Etienne and Denouwé, Decroly Djoubissié and Compaore, Sabour and Dabilgou, Dieudonné and Messan, Adamah},
  title = {Preparation and Investigating the Physical, Mechanical and Thermal Performances of Sand/Soil/Recycled HDPE Composites},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {362},
  doi = {10.3390/jcs10070362}
}
Kostenlos starten →