Mechanical and Thermal Performances of Banana Fiber–Reinforced Gypsum Composites
International Journal of Polymer Science · 2025-01 · 2025 (1)
DOI: 10.1155/ijps/8120082 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Polymer Science, online erschienen am 22.01.2025. Verfasst von Md. Abdur Rouf und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the use of alkali‐treated banana fibers at different weight percentages (0%, 4%, 6%, 8%, 16%, and 24%) as natural reinforcement in gypsum, aiming to assess their effects on the physical, mechanical, thermal, and morphological characteristics, as well as functional groups of composites. It is found that the density of banana fiber–reinforced gypsum composites (BFRGCs) decreases with increasing banana fiber content, reaching a minimum of 0.83 gm/cm 3 at 24 wt.% fiber loading, while water absorption peaks at 98% for the same fiber loading due to the hydrophilic nature of banana fibers. Among the composites, the gypsum composite reinforced with 16 wt.% banana fiber exhibits superior mechanical characteristics, with a significantly higher tensile modulus (4.57 MPa) and flexural modulus (154.25 MPa), as well as tensile and flexural strengths of 0.81 MPa and 1.64 MPa, respectively, compared to the neat gypsum board. Further increasing fiber content to 24 wt.% results in lower tensile and flexural properties. However, adding a 24 wt.% fiber results in a substantial improvement (about 248%) in impact strength compared to the neat gypsum board. The hardness and thermal conductivity of BFRGCs reduce with increasing fiber, with the minimum hardness and thermal conductivity of 57.75 Shore A and 3.42 W/m 2 °C, respectively, at 24 wt.% fiber loading. Beyond 135°C, BFRGCs with 16 wt.% fiber and neat gypsum plaster lose around 15% and 19% of their mass. Scanning electron microscopy demonstrates that alkali treatment improves the fiber–gypsum interfacial bonding, whereas Fourier transform infrared spectroscopy confirms the existence of hydrogen bonds but shows minimal bond formation between the fibers and gypsum. The findings of this study provide insights into lightweight BFRGCs, highlighting their potential for applications in interior partition walls, false ceilings, decorative panels, and so on.
Zitieren
APA
Rouf, M. A., Alam, M. R., Belal, S. A., Ali, Y., & Rahman, M. Z. (2025). Mechanical and Thermal Performances of Banana Fiber–Reinforced Gypsum Composites. International Journal of Polymer Science, 2025(1). https://doi.org/10.1155/ijps/8120082
Vancouver
Rouf MA, Alam MR, Belal SA, Ali Y, Rahman MZ. Mechanical and Thermal Performances of Banana Fiber–Reinforced Gypsum Composites. International Journal of Polymer Science. 2025;2025(1). doi:10.1155/ijps/8120082
BibTeX
@article{Rouf2025,
author = {Rouf, Md. Abdur and Alam, Md. Rubel and Belal, Shah Alimuzzaman and Ali, Yeasin and Rahman, Md Zillur},
title = {Mechanical and Thermal Performances of Banana Fiber–Reinforced Gypsum Composites},
journal = {International Journal of Polymer Science},
year = {2025},
volume = {2025},
number = {1},
doi = {10.1155/ijps/8120082}
}
EUVIMED