Study on Low-Velocity Impact Resistance of SMA-CFRP U-Shaped Structure Considering Curing Residual Stress
Journal of Composites Science · 27.04.2026 · 10 (5) · 233
DOI: 10.3390/jcs10050233 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 27.04.2026. Verfasst von Liangdi Wang und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shaanxi Provincial Key Science and Technology Innovation Team.
Abstract (Originalsprache)
While carbon fiber-reinforced polymer (CFRP) composites are widely utilized in aerospace applications due to their exceptional specific strength and stiffness, they are inevitably subjected to impact loads during service, which can easily induce internal damage such as delamination. To mitigate these issues, this study investigates the low-velocity impact behavior of an SMA-reinforced CFRP U-shaped structure, emphasizing the critical role of curing-induced residual stresses. A numerical model incorporating the thermal-mechanical manufacturing history was developed and validated against experimental data. Results indicate that while embedded superelastic SMA wires effectively suppress crack propagation and enhance energy absorption, neglecting residual stresses leads to a significant overestimation of structural rigidity and peak loads. Due to the coefficient of thermal expansion mismatch between the SMA wires and the resin matrix, the SMA-CFRP system exhibits higher sensitivity to initial internal stresses than pure CFRP. By accounting for the residual stress field, the relative error in predicted peak force and absorbed energy for the SMA-CFRP model was reduced from 9.3% to 3.5% and 18.9% to 7.8%, respectively. These findings demonstrate that residual stress lowers the failure threshold and is essential for capturing the synergistic effects of SMA phase transformation and matrix damage, providing a more accurate reconstruction of the structural energy balance.
Förderung
- National Natural Science Foundation of China
- Shaanxi Provincial Key Science and Technology Innovation Team
Zitieren
APA
Wang, L., Xu, Y., Wang, J., & Zhang, S. (2026). Study on Low-Velocity Impact Resistance of SMA-CFRP U-Shaped Structure Considering Curing Residual Stress. Journal of Composites Science, 10(5), 233. https://doi.org/10.3390/jcs10050233
Vancouver
Wang L, Xu Y, Wang J, Zhang S. Study on Low-Velocity Impact Resistance of SMA-CFRP U-Shaped Structure Considering Curing Residual Stress. Journal of Composites Science. 2026;10(5):233. doi:10.3390/jcs10050233
BibTeX
@article{Wang2026,
author = {Wang, Liangdi and Xu, Yingjie and Wang, Jun and Zhang, Shengnan},
title = {Study on Low-Velocity Impact Resistance of SMA-CFRP U-Shaped Structure Considering Curing Residual Stress},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {5},
pages = {233},
doi = {10.3390/jcs10050233}
}
EUVIMED