Low-Velocity Impact Resistance of 3D Re-Entrant Honeycomb Sandwich Structures with CFRP Face Sheets
Polymers · 22.02.2023 · 15 (5) · 1092
DOI: 10.3390/polym15051092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 22.02.2023. Verfasst von Zhen Cui und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundations of China, National Natural Science Foundations of China.
Abstract (Originalsprache)
Lightweight sandwich structures have been receiving significant attention. By studying and imitating the structure of biomaterials, its application in the design of sandwich structures has also been found to be feasible. With inspiration from the arrangement of fish scales, a 3D re-entrant honeycomb was designed. In addition, a honeycomb stacking method is proposed. The resultant novel re-entrant honeycomb was utilized as the core of the sandwich structure in order to increase the impact resistance of the sandwich structure under impact loads. The honeycomb core is created using 3D printing. By using low-velocity impact experiments, the mechanical properties of the sandwich structure with Carbon-Fiber-Reinforced Polymer (CFRP) face sheets under different impact energies were studied. To further investigate the effect of the structural parameters on the structural, mechanical properties, a simulation model was developed. Simulation methods examined the effect of structural variables on peak contact force, contact time, and energy absorption. Compared to traditional re-entrant honeycomb, the impact resistance of the improved structure is more significant. Under the same impact energy, the upper face sheet of the re-entrant honeycomb sandwich structure sustains less damage and deformation. The improved structure reduces the upper face sheet damage depth by an average of 12% compared to the traditional structure. In addition, increasing the thickness of the face sheet will enhance the impact resistance of the sandwich panel, but an excessively thick face sheet may decrease the structure’s energy absorption properties. Increasing the concave angle can effectively increase the energy absorption properties of the sandwich structure while preserving its original impact resistance. The research results show the advantages of the re-entrant honeycomb sandwich structure, which has certain significance for the study of the sandwich structure.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China.
- School of Aerospace and Mechanical Engineering, Changzhou Institute of Technology, Changzhou 213032, China.
ORCID-Profile: Zhen Cui, Yuechen Duan
Förderung
- the National Natural Science Foundations of China
- National Natural Science Foundations of China
Zitieren
APA
Cui, Z., Qi, J., Duan, Y., Tie, Y., Zheng, Y., Yang, J., & Li, C. (2023). Low-Velocity Impact Resistance of 3D Re-Entrant Honeycomb Sandwich Structures with CFRP Face Sheets. Polymers, 15(5), 1092. https://doi.org/10.3390/polym15051092
Vancouver
Cui Z, Qi J, Duan Y, Tie Y, Zheng Y, Yang J, et al. Low-Velocity Impact Resistance of 3D Re-Entrant Honeycomb Sandwich Structures with CFRP Face Sheets. Polymers. 2023;15(5):1092. doi:10.3390/polym15051092
BibTeX
@article{Cui2023,
author = {Cui, Zhen and Qi, Jiaqi and Duan, Yuechen and Tie, Ying and Zheng, Yanping and Yang, Jun and Li, Cheng},
title = {Low-Velocity Impact Resistance of 3D Re-Entrant Honeycomb Sandwich Structures with CFRP Face Sheets},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1092},
doi = {10.3390/polym15051092}
}
EUVIMED