EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strength and Failure Behavior of Carbon Fiber Composite Laminates Under Biaxial Compression for Deep-Sea Application

Chujie Zhou, Zhanwen Tang, Xiaokai Deng, Yahe Gao, Heng Jiang

Journal of Composites Science · 28.02.2026 · 10 (3) · 130

DOI: 10.3390/jcs10030130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 28.02.2026. Verfasst von Chujie Zhou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing use of carbon fiber-reinforced polymer (CFRP) shells in deep-sea environments calls for a clearer understanding of their mechanical response and failure under complex stress states, particularly biaxial compression. To address this need, laminate and cylindrical-shell specimens with a stacking sequence of [90°/90°/90°/20°/−20°]ns were designed and tested under uniaxial compression, biaxial compression, and hydrostatic pressure. Three-dimensional user material subroutines based on Fortran were developed for the maximum stress/strain, Tsai–Wu, Rationalized Tsai–Wu (R-Tsai–Wu), Hashin, and Shokrieh failure criteria to simulate the failure behavior of CFRP laminates under biaxial compression. The experimental and numerical results show that the biaxial compressive ultimate strength of CFRP is significantly lower than the corresponding uniaxial compressive strength in each loading direction. The Hashin criterion exhibited the highest predictive accuracy, with an error of only 2.6% for the strength in the 90° direction and 15.1% for the 0° direction under equal-displacement biaxial compression. The simulated failure pressure for the cylindrical shell was 20.75 MPa, differing by only 5.7% from the experimentally measured value of 22 MPa. This work provides an important experimental basis and reference for the selection of failure criteria in the strength design and evaluation of CFRP composite shells in deep-sea environments.

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhou, C., Tang, Z., Deng, X., Gao, Y., & Jiang, H. (2026). Strength and Failure Behavior of Carbon Fiber Composite Laminates Under Biaxial Compression for Deep-Sea Application. Journal of Composites Science, 10(3), 130. https://doi.org/10.3390/jcs10030130

Vancouver

Zhou C, Tang Z, Deng X, Gao Y, Jiang H. Strength and Failure Behavior of Carbon Fiber Composite Laminates Under Biaxial Compression for Deep-Sea Application. Journal of Composites Science. 2026;10(3):130. doi:10.3390/jcs10030130

BibTeX
@article{Zhou2026,
  author = {Zhou, Chujie and Tang, Zhanwen and Deng, Xiaokai and Gao, Yahe and Jiang, Heng},
  title = {Strength and Failure Behavior of Carbon Fiber Composite Laminates Under Biaxial Compression for Deep-Sea Application},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {3},
  pages = {130},
  doi = {10.3390/jcs10030130}
}
Kostenlos starten →