Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact
Polymers · 12.09.2024 · 16 (18) · 2581
DOI: 10.3390/polym16182581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.09.2024. Verfasst von Lei Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Shenzhen, Natural Science Foundation of Shenzhen, China.
Abstract (Originalsprache)
Numerous studies have demonstrated that under low-velocity, low-energy impact conditions, although the surface damage to fiber-reinforced composite laminates may be minimal, significant internal damage can occur. Consequently, a progressive damage finite element model was specifically developed for thermoplastic carbon fiber-reinforced composite laminates subjected to low-speed impact loads, with the objective of analyzing the damage behavior of laminates under impacts of varying energy levels. The model utilizes a three-dimensional Hashin criterion for predicting intralayer damage initiation, with cohesive elements based on bilinear traction–separation law for predicting interlaminar delamination initiation, and incorporates a damage constitutive model based on equivalent displacement to characterize fiber damage evolution, along with the B-K criterion for interlaminar damage evolution. The impact response of laminates at energy levels of 5 J, 10 J, 15 J, 20 J, and 25 J was analyzed through numerical simulation, drop-hammer experiments, and XCT non-destructive testing. The results indicated that the simulation outcomes closely correspond with the experimental findings, with both the predicted peak error and absorbed energy error maintained within a 5% margin, and the trends of the mechanical response curves aligning closely with the experimental data. The damage patterns predicted by the numerical simulations were consistent with the results obtained from XCT scans. The study additionally revealed that the impact damage of the laminates primarily stems from interlaminar delamination and intralayer tensile failure. Initial damage typically presents as internal delamination; hence, enhancing interlaminar bonding performance can significantly augment the overall load-bearing capacity of the laminate.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China.
- Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong SAR 999077, China.
ORCID-Profile: Lei Yang, Jianchao Zou
Förderung
- the Natural Science Foundation of Shenzhen
- Natural Science Foundation of Shenzhen, China
Zitieren
APA
Yang, L., Huang, X., Liao, Z., Wei, Z., & Zou, J. (2024). Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact. Polymers, 16(18), 2581. https://doi.org/10.3390/polym16182581
Vancouver
Yang L, Huang X, Liao Z, Wei Z, Zou J. Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact. Polymers. 2024;16(18):2581. doi:10.3390/polym16182581
BibTeX
@article{Yang2024,
author = {Yang, Lei and Huang, Xiaolin and Liao, Zhenhao and Wei, Zongyou and Zou, Jianchao},
title = {Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact},
journal = {Polymers},
year = {2024},
volume = {16},
number = {18},
pages = {2581},
doi = {10.3390/polym16182581}
}
EUVIMED