EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Biomechanical Evaluation of Hook-Plate Versus Bicortical Screw Fixation for Fifth Metatarsal Avulsion Fractures

Robert Daniel Dobrotă iD, Dumitru Ferechide, Mark Pogărășteanu iD, Radu Paraschiv, Marius Moga

Journal of Clinical Medicine · 22.11.2025 · 14 (23) · 8300

DOI: 10.3390/jcm14238300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Clinical Medicine, online erschienen am 22.11.2025. Verfasst von Robert Daniel Dobrotă und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Medicine, Carol Davila University of Medicine and Pharmacy, 37 Dionisie Lupu Street, 020021 Bucharest, Romania. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Avulsion fractures of the fifth metatarsal often require surgical fixation when displacement or instability is present. This study aimed to compare the biomechanical performance of hook-plate and bicortical screw fixation using anatomically accurate 3D-printed metatarsal models analyzed through digital image correlation (DIC).

Methods

Multi-material 3D-printed specimens were subjected to simulated gait-phase loading (α = 0°, 90°, 180°), combined with three interfragmentary distances (d = 0.1, 0.5, 1 mm) following a replicated 3 × 3 factorial design (n = 27 per fixation method). Full-field strain and displacement maps were quantified using ARAMIS DIC.

Results

Hook-plate fixation consistently produced lower maximum stresses compared with bicortical screws (reductions of 9–36 MPa across conditions). The highest stresses were observed for screw fixation at α = 90° and d = 0.1 mm (100.3 ± 1.5 MPa), while the lowest occurred for hook plates at α = 180° and d = 1 mm (33.3 ± 1.5 MPa). ANOVA confirmed significant α×d interactions (p < 0.01).

Conclusions

Hook-plate fixation provided superior angular stability and suggested improved cyclic performance compared to bicortical screws, favoring early mobilization. The combined use of 3D printing and DIC represents a valuable framework for preclinical implant evaluation. These results provide useful insights for selecting the optimal fixation technique in clinical management of fifth metatarsal avulsion fractures.

Schlagwörter

Stichwörter der Autor:innen

3D printingavulsion fracturebicortical screwdigital image correlationfifth metatarsal fracturehook plateorthopedic biomechanics

Autor:innen und Institutionen

  • Faculty of Medicine, Carol Davila University of Medicine and Pharmacy, 37 Dionisie Lupu Street, 020021 Bucharest, Romania.
  • Dr. Carol Davila Central University Emergency Military Hospital, 050474 Bucharest, Romania.
  • Bagdasar-Arseni Clinical Emergency Hospital, 12 Berceni Road, 041915 Bucharest, Romania.

ORCID-Profile: Robert Daniel Dobrotă, Mark Pogărășteanu

Zitieren

APA

Dobrotă, R. D., Ferechide, D., Pogărășteanu, M., Paraschiv, R., & Moga, M. (2025). Comparative Biomechanical Evaluation of Hook-Plate Versus Bicortical Screw Fixation for Fifth Metatarsal Avulsion Fractures. Journal of Clinical Medicine, 14(23), 8300. https://doi.org/10.3390/jcm14238300

Vancouver

Dobrotă RD, Ferechide D, Pogărășteanu M, Paraschiv R, Moga M. Comparative Biomechanical Evaluation of Hook-Plate Versus Bicortical Screw Fixation for Fifth Metatarsal Avulsion Fractures. Journal of Clinical Medicine. 2025;14(23):8300. doi:10.3390/jcm14238300

BibTeX
@article{Dobrot2025,
  author = {Dobrotă, Robert Daniel and Ferechide, Dumitru and Pogărășteanu, Mark and Paraschiv, Radu and Moga, Marius},
  title = {Comparative Biomechanical Evaluation of Hook-Plate Versus Bicortical Screw Fixation for Fifth Metatarsal Avulsion Fractures},
  journal = {Journal of Clinical Medicine},
  year = {2025},
  volume = {14},
  number = {23},
  pages = {8300},
  doi = {10.3390/jcm14238300}
}
Kostenlos starten →