Research on the Cutting Efficiency of TBM Cutters in Jointed Rock Mass Based on a Multivariate Nonlinear Regression Model
Infrastructures · 16.07.2026 · 11 (7) · 241
DOI: 10.3390/infrastructures11070241 ↗Kurz gefasst
Fachartikel in der Zeitschrift Infrastructures, online erschienen am 16.07.2026. Verfasst von Pengfei Song und 10 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province.
Abstract (Originalsprache)
The factors influencing the cutting efficiency of tunnel boring machine (TBM) cutters in jointed rock masses are very complex. To investigate TBM disc cutter cutting performance under variable cutter spacing and penetration depth, Particle Flow Code (PFC) 2D discrete element numerical simulation is carried out on a granite jointed rock mass. The numerical model adopts a disc cutter tip angle of 20° and tip width of 12 mm, joint spacing of 5 mm, joint inclination angle of 45°, and lateral confining pressure of 2.5 MPa; cutter spacing is set to 60, 80, 100, 120 mm, and penetration depth ranges from 2 mm to 10 mm as research variables. The force chain distribution, jointed rock mass failure modes, penetration load and cutting efficiency of disc cutters under different working conditions are systematically analyzed. An indicator for measuring the cutting efficiency called “crack propagation specific energy” is proposed. Based on the numerical simulation results, a complete quadratic multivariate nonlinear regression model is established to predict cutting efficiency. The results show that the optimal cutting performance occurs at a cutter spacing of 80 mm, where the shear failure proportion of contact bonds and cutting efficiency simultaneously reach the maximum, while incomplete penetration of joint failure surfaces and small cutting areas appear under 60 mm and 120 mm cutter spacing. With the increase in the disc cutter penetration depth, the shear failure proportion of contact bonds rises continuously, and the number of tensile failure microcracks gradually decreases. The research outcomes can provide a theoretical reference for TBM shield tunnel construction parameter optimization.
Förderung
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Song, P., Liu, B., Tan, Z., Yi, C., Shi, J., Xiang, X., Peng, Y., Xie, J., Liu, J., Cui, H., & Liu, B. (2026). Research on the Cutting Efficiency of TBM Cutters in Jointed Rock Mass Based on a Multivariate Nonlinear Regression Model. Infrastructures, 11(7), 241. https://doi.org/10.3390/infrastructures11070241
Vancouver
Song P, Liu B, Tan Z, Yi C, Shi J, Xiang X, et al. Research on the Cutting Efficiency of TBM Cutters in Jointed Rock Mass Based on a Multivariate Nonlinear Regression Model. Infrastructures. 2026;11(7):241. doi:10.3390/infrastructures11070241
BibTeX
@article{Song2026,
author = {Song, Pengfei and Liu, Bingquan and Tan, Zhiwen and Yi, Chengzhi and Shi, Jia and Xiang, Xin and Peng, Yue and Xie, Junning and Liu, Junfeng and Cui, Hongzhi and Liu, Bolong},
title = {Research on the Cutting Efficiency of TBM Cutters in Jointed Rock Mass Based on a Multivariate Nonlinear Regression Model},
journal = {Infrastructures},
year = {2026},
volume = {11},
number = {7},
pages = {241},
doi = {10.3390/infrastructures11070241}
}
EUVIMED