EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Optimization Method of TBM Disk Cutter Spacing in Jointed Rock Mass

Pengfei Song, Zhiwen Tan, Bingquan Liu, Chengzhi Yi, Jia Shi, Daibiao Yin, Yunchong Peng, Junning Xie, Junfeng Liu

Infrastructures · 15.04.2026 · 11 (4) · 137

DOI: 10.3390/infrastructures11040137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 15.04.2026. Verfasst von Pengfei Song und 8 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the influence of three key parameters, which are the spacing of cutters, the dip angle of joints and the spacing of joints on the load evolution process of jointed rock masses from the perspective of rock-breaking mechanics. Furthermore, how variations in cutter spacing and joint characteristics affect cutting efficiency is studied from a macroscopic viewpoint, focusing on indicators such as specific energy (SE) for crack propagation and rock fragment formation. Based on the research results, a novel optimization approach for cutter spacing in jointed rock mass conditions is proposed. The optimal cutter spacings under varying joint conditions are calculated, and the effects of joint spacing and dip angle on cutter spacing optimization are systematically discussed. The results show that when the joint dip angle is 60°, the cutter spacing is 100 mm, and the joint spacing is 30 mm, the rock fragmentation efficiency reaches the highest. It is also found that the influence of the joint dip angle on the optimal cutter spacing is greater than that of the joint spacing. When the joint spacing is 70 mm, the corresponding optimal cutter spacing is 100.7 mm. When the joint dip angle increases from 0° to 60°, the optimal cutter spacing gradually increases to 112.8 mm. When the joint spacing is greater than 60 mm, the optimal hammer spacing of the hammer gradually decreases.

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province

Zitieren

APA

Song, P., Tan, Z., Liu, B., Yi, C., Shi, J., Yin, D., Peng, Y., Xie, J., & Liu, J. (2026). Study on the Optimization Method of TBM Disk Cutter Spacing in Jointed Rock Mass. Infrastructures, 11(4), 137. https://doi.org/10.3390/infrastructures11040137

Vancouver

Song P, Tan Z, Liu B, Yi C, Shi J, Yin D, et al. Study on the Optimization Method of TBM Disk Cutter Spacing in Jointed Rock Mass. Infrastructures. 2026;11(4):137. doi:10.3390/infrastructures11040137

BibTeX
@article{Song2026,
  author = {Song, Pengfei and Tan, Zhiwen and Liu, Bingquan and Yi, Chengzhi and Shi, Jia and Yin, Daibiao and Peng, Yunchong and Xie, Junning and Liu, Junfeng},
  title = {Study on the Optimization Method of TBM Disk Cutter Spacing in Jointed Rock Mass},
  journal = {Infrastructures},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {137},
  doi = {10.3390/infrastructures11040137}
}
Kostenlos starten →