EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adjoint-Based Design Optimization of a Volute for a Radial Compressor

Romain Hottois, Arnaud Châtel, Tom Verstraete

International Journal of Turbomachinery, Propulsion and Power · 13.10.2023 · 8 (4) · 41

DOI: 10.3390/ijtpp8040041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Turbomachinery, Propulsion and Power, online erschienen am 13.10.2023. Verfasst von Romain Hottois und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Numerical optimization methods are widely used for designing turbomachinery components due to the cost and time savings they can provide. In the available literature, the shape optimization of radial compressors mainly focuses on improving the impeller alone. However, it is well-established knowledge that the volute plays a key role in the overall performance of the compressor. The aim of the present paper is to perform an adjoint-based optimization of a volute that is designed for the SRV2-O compressor. The CAD model was first created by using the parametrization of 33 design parameters. Then, a butterfly topology was applied to mesh the computational domain with a multi-block structured grid, and an elliptic smoothing procedure was used to improve the quality of the fluid grid. A steady-state RANS CFD solver with a Spalart-Allmaras turbulence model was used to solve the Navier–Stokes equations, and then the flow sensitivities were computed with an adjoint solver. The objective function consists of minimizing the loss coefficient of the volute. The optimization is performed to obtain an improved design with a 14% loss reduction. A detailed flow and design analysis is carried out to highlight the loss reduction mechanisms, followed by the optimizer. Finally, the compressor map of the full stage is compared between the baseline and the optimized volute from the CFD simulations using a mixing plane interface. This research demonstrates the successful use of a gradient-based optimization technique to improve the volute of a radial compressor and opens the door towards simultaneously optimizing the wheel and the volute.

Zitieren

APA

Hottois, R., Châtel, A., & Verstraete, T. (2023). Adjoint-Based Design Optimization of a Volute for a Radial Compressor. International Journal of Turbomachinery, Propulsion and Power, 8(4), 41. https://doi.org/10.3390/ijtpp8040041

Vancouver

Hottois R, Châtel A, Verstraete T. Adjoint-Based Design Optimization of a Volute for a Radial Compressor. International Journal of Turbomachinery, Propulsion and Power. 2023;8(4):41. doi:10.3390/ijtpp8040041

BibTeX
@article{Hottois2023,
  author = {Hottois, Romain and Châtel, Arnaud and Verstraete, Tom},
  title = {Adjoint-Based Design Optimization of a Volute for a Radial Compressor},
  journal = {International Journal of Turbomachinery, Propulsion and Power},
  year = {2023},
  volume = {8},
  number = {4},
  pages = {41},
  doi = {10.3390/ijtpp8040041}
}
Kostenlos starten →