EUVIMEDEUVIMED entdecken
Crossref

Data-Driven Radial Compressor Design Space Mapping

J. Brind

Journal of Turbomachinery · 01.02.2025 · 147 (2)

DOI: 10.1115/1.4066229 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.09.2024. Verfasst von J. Brind. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Estimates of turbomachinery performance trends inform system-level compromises during preliminary design. Existing empirical correlations for efficiency use limited experimental data, while analytical loss models require calibration to yield predictive results. From a set of 3708 radial compressor computations, this paper maps efficiency as a function of mean-line aerodynamics, and determines the governing loss mechanisms. An open-source turbomachinery design code creates annulus and blade geometry, then runs a Reynolds-averaged Navier–Stokes simulation for compressors sampled from the mean-line design space. Polynomial surface fits yield a continuous eight-dimensional representation of the design space for analysis, predicting efficiency with a root-mean-square error of 1.2% points. The results show a balance between surface dissipation in boundary layers and mixing loss due to casing separations sets optimum values for inlet Mach number, hub-to-tip ratio, de Haller number, and backsweep angle. Surface dissipation drives the effect of flow coefficient, with high surface areas at low values, and high velocities at high values. Compact compressor designs are achieved by increasing inlet Mach number, reducing hub-to-tip ratio, and minimizing the radial loading coefficient—all of which reduce efficiency approaching design space boundaries. An interactive web-based tool makes the results available to practising engineers, demonstrating large ensembles of automated designs and simulations as a higher-fidelity replacement for legacy empirical correlations in preliminary design.

Zitieren

APA

Brind, J. (2025). Data-Driven Radial Compressor Design Space Mapping. Journal of Turbomachinery, 147(2). https://doi.org/10.1115/1.4066229

Vancouver

Brind J. Data-Driven Radial Compressor Design Space Mapping. Journal of Turbomachinery. 2025;147(2). doi:10.1115/1.4066229

BibTeX
@article{Brind2025,
  author = {Brind, J.},
  title = {Data-Driven Radial Compressor Design Space Mapping},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {2},
  doi = {10.1115/1.4066229}
}
Kostenlos starten →