EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Anisotropic Osteoinductive Capacity of a Nickel–Titanium Alloy Fabricated Through Laser Powder Bed Fusion

Yu Sun iD, Zhenglei Yu, Qingping Liu, Luquan Ren, Xin Zhao, Jincheng Wang

International Journal of Molecular Sciences · 2025

DOI: 10.3390/ijms26104640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2025. Verfasst von Yu Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedic Medical Center, The 2nd Hospital of Jilin University, Changchun 130041, China. Hauptthemen laut MEDLINE: Titanium, Osteogenesis, Nickel, Alloys. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Provincial Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel parameter optimization method for additively manufacturing nickel–titanium (NiTi) alloys using laser powder bed fusion (LBPF) was developed. Compared with the conventional NiTi alloy and the previously reported LPBF-NiTi alloy, the LBPF-NiTi alloy prepared with these parameters exhibits excellent tensile properties and an anisotropic microstructure. Since distinct regions of orthopedic implants have specific functional requirements, we investigated the anisotropy of this LPBF-NiTi in terms of its osteoinductive capacity to determine the appropriate building direction for prosthesis fabrication. The biosafety of the transverse (XY-NiTi) and longitudinal (XZ-NiTi) planes was assessed through cytotoxicity assays. Comparative analyses of the biological activities of these planes were conducted by evaluating the adherent cell counts, the adhesion morphology, and the expression of osteogenic-related genes and factors in adherent cells. Compared with XZ-NiTi, XY-NiTi exhibited superior cell adhesion properties. Additionally, the expression levels of osteogenic markers (RUNX2, ALP, OPG, and OCN) were significantly greater in bone marrow mesenchymal cells (BMMCs) adhered to XY-NiTi than in those adhered to XZ-NiTi. These results indicate a greater osteogenic potential in the XY-NiTi group. XY-NiTi was more advantageous as an implant–bone contact surface. Building implant products in the direction perpendicular to the load-bearing axis enhances biofixation; thus, this is the preferred orientation for manufacturing orthopedic implants.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumOsteogenesisNickelAlloysLasersMesenchymal Stem CellsCell AdhesionAnimalsAnisotropyPowdersMaterials TestingBiocompatible MaterialsMice

Stichwörter der Autor:innen

LPBF-NiTianisotropybiofixationorthopedic implantsosteoinductive capacity

Substanzen

TitaniumNickelAlloystitanium nickelidePowdersBiocompatible Materials

Autor:innen und Institutionen

  • Orthopaedic Medical Center, The 2nd Hospital of Jilin University, Changchun 130041, China.
  • Key of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China.

ORCID-Profile: Yu Sun

Förderung

  • Jilin Provincial Natural Science Foundation

Zitieren

APA

Sun, Y., Yu, Z., Liu, Q., Ren, L., Zhao, X., & Wang, J. (2025). The Anisotropic Osteoinductive Capacity of a Nickel–Titanium Alloy Fabricated Through Laser Powder Bed Fusion. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms26104640

Vancouver

Sun Y, Yu Z, Liu Q, Ren L, Zhao X, Wang J. The Anisotropic Osteoinductive Capacity of a Nickel–Titanium Alloy Fabricated Through Laser Powder Bed Fusion. International Journal of Molecular Sciences. 2025. doi:10.3390/ijms26104640

BibTeX
@article{Sun2025,
  author = {Sun, Yu and Yu, Zhenglei and Liu, Qingping and Ren, Luquan and Zhao, Xin and Wang, Jincheng},
  title = {The Anisotropic Osteoinductive Capacity of a Nickel–Titanium Alloy Fabricated Through Laser Powder Bed Fusion},
  journal = {International Journal of Molecular Sciences},
  year = {2025},
  doi = {10.3390/ijms26104640}
}
Kostenlos starten →