EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization

Conor O'Keeffe iD, Marcin Kotlarz iD, Inês F Gonçalves, Caitríona Lally iD, Daniel J Kelly iD

Journal of Biomedical Materials Research Part A · 2024

DOI: 10.1002/jbm.a.37709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, 2024. Verfasst von Conor O'Keeffe und 4 weiteren Autor:innen. Beteiligte Einrichtung: Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin, Ireland. Hauptthemen laut MEDLINE: Mesenchymal Stem Cells, Titanium, Alloys, Biocompatible Materials. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation Ireland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous titanium scaffolds fabricated by powder bed fusion additive manufacturing techniques have been widely adopted for orthopedic and bone tissue engineering applications. Despite the many advantages of this approach, topological defects inherited from the fabrication process are well understood to negatively affect mechanical properties and pose a high risk if dislodged after implantation. Consequently, there is a need for further post‐process surface cleaning. Traditional techniques such as grinding or polishing are not suited to lattice structures, due to lack of a line of sight to internal features. Chemical etching is a promising alternative; however, it remains unclear if changes to surface properties associated with such protocols will influence how cells respond to the material surface. In this study, we explored the response of bone marrow derived mesenchymal stem/stromal cells (MSCs) to Ti‐6Al‐4V whose surface was exposed to different durations of chemical etching. Cell morphology was influenced by local topological features inherited from the SLM fabrication process. On the as‐built surface, topological nonhomogeneities such as partially adhered powder drove a stretched anisotropic cellular morphology, with large areas of the cell suspended across the nonhomogeneous powder interface. As the etching process was continued, surface defects were gradually removed, and cell morphology appeared more isotropic and was suggestive of MSC differentiation along an osteoblastic‐lineage. This was accompanied by more extensive mineralization, indicative of progression along an osteogenic pathway. These findings point to the benefit of post‐process chemical etching of additively manufactured Ti‐6Al‐4V biomaterials targeting orthopedic applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Mesenchymal Stem CellsTitaniumAlloysBiocompatible MaterialsLasersCalcification, PhysiologicAnimalsCell DifferentiationHumansSurface PropertiesMaterials Testing

Stichwörter der Autor:innen

Ti‐6Al‐4Vchemical etchingmechanotransductionmineralisationselective laser melting

Substanzen

Titaniumtitanium alloy (TiAl6V4)AlloysBiocompatible Materials

Autor:innen und Institutionen

  • Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin, Ireland.
  • Department of Mechanical, Manufacturing and Biomedical Engineering, School of Engineering, Trinity College Dublin, Dublin, Ireland.
  • AMBER, the SFI Research Centre for Advanced Materials and Bioengineering Research, Ireland.
  • Department of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.

ORCID-Profile: Conor O'Keeffe, Marcin Kotlarz, Caitríona Lally, Daniel J Kelly

Förderung

  • Science Foundation Ireland

Zitieren

APA

O'Keeffe, C., Kotlarz, M., Gonçalves, I. F., Lally, C., & Kelly, D. J. (2024). Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.37709

Vancouver

O'Keeffe C, Kotlarz M, Gonçalves IF, Lally C, Kelly DJ. Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization. Journal of Biomedical Materials Research Part A. 2024. doi:10.1002/jbm.a.37709

BibTeX
@article{OKeeffe2024,
  author = {O'Keeffe, Conor and Kotlarz, Marcin and Gonçalves, Inês F and Lally, Caitríona and Kelly, Daniel J},
  title = {Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization},
  journal = {Journal of Biomedical Materials Research Part A},
  year = {2024},
  doi = {10.1002/jbm.a.37709}
}
Kostenlos starten →