EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Bioprinting Technologies and Bioinks for Vascular Model Establishment

Zhiyuan Kong, Xiaohong Wang

International Journal of Molecular Sciences · 03.01.2023 · 24 (1) · 891

DOI: 10.3390/ijms24010891 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 03.01.2023. Verfasst von Zhiyuan Kong und 1 weiteren Autor:innen. Beteiligte Einrichtung: Center of 3D Printing & Organ Manufacturing, School of Intelligent Medicine, China Medical University (CMU), No. 77 Puhe Road, Shenyang North New Are…. Hauptthemen laut MEDLINE: Endothelial Cells, Bioprinting. Die Arbeit wurde bisher 59-mal zitiert (Crossref) und nennt 214 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clinically, large diameter artery defects (diameter larger than 6 mm) can be substituted by unbiodegradable polymers, such as polytetrafluoroethylene. There are many problems in the construction of small diameter blood vessels (diameter between 1 and 3 mm) and microvessels (diameter less than 1 mm), especially in the establishment of complex vascular models with multi-scale branched networks. Throughout history, the vascularization strategies have been divided into three major groups, including self-generated capillaries from implantation, pre-constructed vascular channels, and three-dimensional (3D) printed cell-laden hydrogels. The first group is based on the spontaneous angiogenesis behaviour of cells in the host tissues, which also lays the foundation of capillary angiogenesis in tissue engineering scaffolds. The second group is to vascularize the polymeric vessels (or scaffolds) with endothelial cells. It is hoped that the pre-constructed vessels can be connected with the vascular networks of host tissues with rapid blood perfusion. With the development of bioprinting technologies, various fabrication methods have been achieved to build hierarchical vascular networks with high-precision 3D control. In this review, the latest advances in 3D bioprinting of vascularized tissues/organs are discussed, including new printing techniques and researches on bioinks for promoting angiogenesis, especially coaxial printing, freeform reversible embedded in suspended hydrogel printing, and acoustic assisted printing technologies, and freeform reversible embedded in suspended hydrogel (flash) technology.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Endothelial CellsBioprintingPrinting, Three-DimensionalTissue EngineeringTissue ScaffoldsTechnologyHydrogelsPolymers

Stichwörter der Autor:innen

3D bioprintingbiomaterialsorgan manufacturingtissue engineeringvascular networks

Substanzen

HydrogelsPolymers

Autor:innen und Institutionen

  • Center of 3D Printing & Organ Manufacturing, School of Intelligent Medicine, China Medical University (CMU), No. 77 Puhe Road, Shenyang North New Area, Shenyang 110122, China.
  • Key Laboratory for Advanced Materials Processing Technology, Ministry of Education & Center of Organ Manufacturing, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China.

Zitieren

APA

Kong, Z., & Wang, X. (2023). Bioprinting Technologies and Bioinks for Vascular Model Establishment. International Journal of Molecular Sciences, 24(1), 891. https://doi.org/10.3390/ijms24010891

Vancouver

Kong Z, Wang X. Bioprinting Technologies and Bioinks for Vascular Model Establishment. International Journal of Molecular Sciences. 2023;24(1):891. doi:10.3390/ijms24010891

BibTeX
@article{Kong2023,
  author = {Kong, Zhiyuan and Wang, Xiaohong},
  title = {Bioprinting Technologies and Bioinks for Vascular Model Establishment},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  volume = {24},
  number = {1},
  pages = {891},
  doi = {10.3390/ijms24010891}
}
Kostenlos starten →