Microfiber‐Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting
Small · 2025
DOI: 10.1002/smll.202501594 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, 2025. Verfasst von Yuzhi Guo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Biomanufacturing and Rapid Forming Technology Key Laboratory of Beijing, Biomanufacturing and Engineering Living Systems Innovation International Tal…. Hauptthemen laut MEDLINE: Bioprinting, Printing, Three-Dimensional, Ink, Microvessels. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Vascularization is key to the biofabrication of large‐scale tissues. Despite the progress, there remain some outstanding challenges, such as limited vessel density, difficulty in fabricating microvasculatures, and inhomogeneity of post‐seeding cells. Here, a new form of bioink called microfiber‐templated porogel (µFTP) bioink is introduced to engineer vasculatures down to the filament building blocks of 3D bioprinted hydrogels. The cell‐laden sacrificial microfibers (diameter ranges from 50–150 µm) are embedded in the bioink to template tubular voids and deliver endothelial cells for in‐situ endothelialization. The inclusion of softening hydrogel microfibers retains the desirable rheological properties of the bioink for extrusion‐based bioprinting and the microfibers are well inter‐contacted in the extruded filament. Such bioinks can be printed into a well‐defined 3D structure with tunable tubular porosities up to 55%. Compared to the conventional bulk bioink counterpart, the µFTP bioink supports the significant growth and spread of endothelial cells either embedded in the matrix or sacrificial fibers, free of the post‐cell seeding procedure. Furthermore, the bioprinted scaffolds based on µFTP bioink are seen to significantly promote the in‐growth of blood vessels and native tissues in vivo. The µFTP bioink approach enables the engineering of tubular bio‐interfaces within the building blocks and contributes to the in‐situ endothelialization of microvasculatures, providing a versatile tool for the construction of customized vascularized tissue models.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Biomanufacturing and Rapid Forming Technology Key Laboratory of Beijing, Biomanufacturing and Engineering Living Systems Innovation International Talents Base (111Base), Department of Mechanical Engineering, Tsinghua Un…
- Department of Orthopedics, Peking University Third Hospital, Beijing, 100191, China.
- State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing, 100084, China.
ORCID-Profile: Liliang Ouyang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Guo, Y., Wang, Z., Zhang, X., Li, J., Gao, S., Lv, Y., & Ouyang, L. (2025). Microfiber‐Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting. Small. https://doi.org/10.1002/smll.202501594
Vancouver
Guo Y, Wang Z, Zhang X, Li J, Gao S, Lv Y, et al. Microfiber‐Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting. Small. 2025. doi:10.1002/smll.202501594
BibTeX
@article{Guo2025,
author = {Guo, Yuzhi and Wang, Ziyu and Zhang, Xuening and Li, Jinghang and Gao, Shan and Lv, Yang and Ouyang, Liliang},
title = {Microfiber‐Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting},
journal = {Small},
year = {2025},
doi = {10.1002/smll.202501594}
}
EUVIMED