EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Long-Term Exposure in Liquid Hydrogen: Mechanical Properties and Microstructural Investigation of 304 Austenitic Steel After 30 Years of Service

Camelia Schulz, Monzer Maarouf, Zahra Abbasi, Elvina Gaisina, Astrid Pundt, Klaus-Peter Weiss

Hydrogen · 14.05.2026 · 7 (2) · 69

DOI: 10.3390/hydrogen7020069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Hydrogen, online erschienen am 14.05.2026. Verfasst von Camelia Schulz und 5 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Research, Technology and Space, Projektträger Jülich.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although austenitic steels have been implemented in direct liquid hydrogen (LH2) contact for decades, detailed microstructural and mechanical studies are still rare at a temperature of 20 K and inexistent for long-term exposure in LH2. Therefore, austenitic stainless-steel parts, which were in direct contact with LH2, from a container for LH2 transport from the company Linde GmbH that has been in service for over 30 years, was chosen as a material model system for this investigation. In the present work, the possible influence of cryogenic gaseous and liquid H2 (GH2 and LH2) on the micro- and macroscopic as well as mechanical properties of the container was investigated. Monitoring the properties after long-term GH2 and LH2-exposed material assesses the durability and the failure characteristics of these austenitic steels. A mean content of 2.5 ppm H was detected in the container walls after the long-term exposure. The microhardness of the long-term GH2 and LH2 are similar to an H2 non-exposed sample. Based on the SEM investigations, no microstructural change could be detected in the material after long-term H2 exposure and the residual tensile properties are still similar to those of ‘fresh’ non-exposed material. The hydrogen embrittlement (HE) occurred in the container material only after additional thermal H-charging, where the ductility reduced to about 50% at 200 K.

Förderung

  • Federal Ministry of Research, Technology and Space
  • Projektträger Jülich

Zitieren

APA

Schulz, C., Maarouf, M., Abbasi, Z., Gaisina, E., Pundt, A., & Weiss, K. (2026). Long-Term Exposure in Liquid Hydrogen: Mechanical Properties and Microstructural Investigation of 304 Austenitic Steel After 30 Years of Service. Hydrogen, 7(2), 69. https://doi.org/10.3390/hydrogen7020069

Vancouver

Schulz C, Maarouf M, Abbasi Z, Gaisina E, Pundt A, Weiss K. Long-Term Exposure in Liquid Hydrogen: Mechanical Properties and Microstructural Investigation of 304 Austenitic Steel After 30 Years of Service. Hydrogen. 2026;7(2):69. doi:10.3390/hydrogen7020069

BibTeX
@article{Schulz2026,
  author = {Schulz, Camelia and Maarouf, Monzer and Abbasi, Zahra and Gaisina, Elvina and Pundt, Astrid and Weiss, Klaus-Peter},
  title = {Long-Term Exposure in Liquid Hydrogen: Mechanical Properties and Microstructural Investigation of 304 Austenitic Steel After 30 Years of Service},
  journal = {Hydrogen},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {69},
  doi = {10.3390/hydrogen7020069}
}
Kostenlos starten →