EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A CE-C4D Platform Integrating 3D-Printer Ecosystems, Luer-Standard Pneumatics, and Open-Source Hardware

Gabriel Siano, Agustín Capovilla, Leonardo Giovanini, Pablo A. Kler

Hardware · 05.11.2026 · 4 (4) · 22

DOI: 10.3390/hardware4040022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Hardware, online erschienen am 05.11.2026. Verfasst von Gabriel Siano und 3 weiteren Autor:innen. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Ciencia, Tecnología e Innovación de Santa Fe, Agencia I+D+i.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Capillary electrophoresis with Capacitively Coupled Contactless Conductivity Detection (CE-C4D) offers high analytical efficiency and low sample consumption. However, commercial instrumentation remains cost-prohibitive for resource-limited or citizen science settings. Here, we report the design, fabrication, and experimental validation of a low-cost, modular CE-C4D platform based on open hardware architectures (dual C4D, Arduino, RAMPS, and syringe pump modules), FDM 3D-printed parts, 3D printer hardware, Luer-standard medical supplies for pneumatic integrity, and a commercial DC–DC converter. Pressure-driven flow tests demonstrated excellent pneumatic and hydrodynamic stability, yielding variation coefficients below 0.5% for displaced sample plugs. Low-pressure Dual-Opposite Injections of nanoliter-scale sample plugs were implemented using custom hollow-electrode manifolds and a motorized medical three-way valve. Operating under suppressed electroosmotic flow in 2.3 M acetic acid, simultaneous separation of inorganic ions (K+, Ca2+, Mg2+, NO3−, Cl−, SO42−) was achieved in synthetic and commercial hydroponic nutrient samples in less than 5 min for single-detector readings and 12 min for dual-point detection. Dual-point detection enables in-line auto-verification of assay validity, continuously confirming electromigration velocity, peak identity, and hydrodynamic consistency. The hardware achieves reliable run-to-run repeatability and robust fluidic control, providing an accessible, replicable instrument foundation for decentralized chemical profiling and quantitative analytical methods.

Förderung

  • Secretaría de Ciencia, Tecnología e Innovación de Santa Fe
  • Agencia I+D+i

Zitieren

APA

Siano, G., Capovilla, A., Giovanini, L., & Kler, P. A. (2026). A CE-C4D Platform Integrating 3D-Printer Ecosystems, Luer-Standard Pneumatics, and Open-Source Hardware. Hardware, 4(4), 22. https://doi.org/10.3390/hardware4040022

Vancouver

Siano G, Capovilla A, Giovanini L, Kler PA. A CE-C4D Platform Integrating 3D-Printer Ecosystems, Luer-Standard Pneumatics, and Open-Source Hardware. Hardware. 2026;4(4):22. doi:10.3390/hardware4040022

BibTeX
@article{Siano2026,
  author = {Siano, Gabriel and Capovilla, Agustín and Giovanini, Leonardo and Kler, Pablo A.},
  title = {A CE-C4D Platform Integrating 3D-Printer Ecosystems, Luer-Standard Pneumatics, and Open-Source Hardware},
  journal = {Hardware},
  year = {2026},
  volume = {4},
  number = {4},
  pages = {22},
  doi = {10.3390/hardware4040022}
}
Kostenlos starten →