EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing an Open-Source Multi-Vat Digital Light Processing Printer

Syed Raza ur Rehman, Gene Tyler Felix, Yuang Zhang, Akhilesh K. Gaharwar

ACS Omega · 09.11.2026

DOI: 10.1021/acsomega.6c07287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 09.11.2026. Verfasst von Syed Raza ur Rehman und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Dental and Craniofacial Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing has undergone rapid evolution in modalities that can mimic some of the aspect of native human tissue architectures with high resolution. Among these emerging approaches, digital light processing (DLP)-based printing enables the fabrication of intricate biomimetic architectures through the photopolymerization of polymer-based hydrogels. The recent emergence of multivat printing further enhances this capability, enabling the spatial arrangement of differently formulated or labeled photocrosslinkable resins. However, the widespread adoption of DLP printing remains constrained by the high cost, proprietary hardware, and limited customizability of commercially available systems. Here, we present an open-source multivat DLP printing platform developed through the integration and modification of two low-cost commercially available 3D printers. A dedicated Python-based graphical user interface was developed, providing user-defined control over critical printing parameters, including exposure time, layer height, printing sequence, and vat switching. Comprehensive hardware documentation and a complete bill of materials (BOM) are provided to ensure reproducibility and accessibility across research laboratories. In addition to multivat printing, the system enables spatial modulation of mechanical properties within a single photocrosslinkable formulation through programmable light exposure and supports enhanced z-axis resolution through user-defined layer thickness control. The platform was validated through the fabrication of geometrically complex, multivat, and mechanically heterogeneous constructs. Collectively, this work establishes an accessible and customizable DLP printing platform that enables advanced hydrogel fabrication and demonstrates automated multivat printing.

Förderung

  • National Institute of Dental and Craniofacial Research

Zitieren

APA

Rehman, S. R. U., Felix, G. T., Zhang, Y., & Gaharwar, A. K. (2026). Designing an Open-Source Multi-Vat Digital Light Processing Printer. ACS Omega. https://doi.org/10.1021/acsomega.6c07287

Vancouver

Rehman SRU, Felix GT, Zhang Y, Gaharwar AK. Designing an Open-Source Multi-Vat Digital Light Processing Printer. ACS Omega. 2026. doi:10.1021/acsomega.6c07287

BibTeX
@article{Rehman2026,
  author = {Rehman, Syed Raza ur and Felix, Gene Tyler and Zhang, Yuang and Gaharwar, Akhilesh K.},
  title = {Designing an Open-Source Multi-Vat Digital Light Processing Printer},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c07287}
}
Kostenlos starten →